Handleiding
Je bekijkt pagina 229 van 259
Home > Machine Settings > Change Machine Settings from the Control Panel > Menu Table (for LCD
Models) > Settings Tables (HL-L2400DW/HL-L2400DWE/HL-L2442DW/HL-L2445DW/HL-L2447DW/
HL-L2460DN/HL-L2865DW)
Settings Tables (HL-L2400DW/HL-L2400DWE/HL-L2442DW/
HL-L2445DW/HL-L2447DW/HL-L2460DN/HL-L2865DW)
Related Models: HL-L2400DW/HL-L2400DWE/HL-L2442DW/HL-L2445DW/HL-L2447DW/HL-L2460DN/
HL-L2865DW
Use these tables to understand the various menus and options that you will use to set your preferences on the
machine.
>> [General Setup]
>> [Printer]
>> [Network] (HL-L2400DW/HL-L2400DWE/HL-L2442DW)
>> [Network] (HL-L2460DN)
>> [Network] (HL-L2445DW/HL-L2447DW/HL-L2865DW)
>> [Print Reports]
>> [Machine Info.]
>> [Initial Setup]
[General Setup]
Level 3
Level 4 Level 5 Description
Tray Setting Paper Type
- Set the type of paper in the paper tray.
Paper Size
- Set the paper size in the paper tray.
Manual Feed
- Select the paper tray you want to use.
Print
Position
X Offset
Adjust the print start position (usually at the upper left corner of a
page) for the paper you loaded in the paper tray horizontally from
-500 (left) to +500 (right) dots when printing at 300 dpi.
Y Offset
Adjust the print start position (usually at the upper left corner of a
page) for the paper you loaded in the paper tray vertically from
-500 (up) to +500 (down) dots when printing at 300 dpi.
Check Paper
- Select whether or not to display a message indicating you must
check the paper type and paper size when you pull a paper tray
out of the machine.
Ecology Eco Mode
- Turn the following machine settings on:
• 2-sided Print: Long Edge
1
• Sleep Time: 0Min
• Quiet Mode: On
1
• Toner Save: On
1
Toner Save
- Increase the page yield of the toner cartridge.
Sleep Time
- Set how much time should pass before the machine enters Power
Saving mode.
Quiet Mode
- Decrease printing noise.
Auto Power
Off
- Set the number of hours that the machine will remain in Deep
Sleep mode before going into Power Off mode.
Panel Control Button Repeat
-
Set the time for the LCD message to change when holding a or b.
Message
Scroll
- Set the time in seconds that an LCD message will scroll across
the LCD. From Level 1 (0.2 s) to Level 10 (2 s).
LCD Contrast
- Adjust the contrast of the LCD.
224
Bekijk gratis de handleiding van Brother HL-L2442DW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brother |
| Model | HL-L2442DW |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 20718 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Ingebouwd display | Ja |
| Gewicht | 6000 g |
| Breedte | 356 mm |
| Diepte | 360 mm |
