Handleiding
Je bekijkt pagina 224 van 259
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set the
Continue Mode
Set the Continue Mode
The Continue Mode forces the machine to continue printing after the control panel or the Status Monitor displays
"Replace Toner".
The machine will continue printing until the LCD or the Status Monitor displays "Toner Ended".
The factory setting is "Stop".
• When the control panel or the Status Monitor indicates an error, you cannot change the mode.
• If you continue printing in the Continue Mode, we cannot guarantee the print quality.
• While using Continue Mode the print may appear faint.
• After replacing the toner cartridge with a new one, the Continue Mode will go back to the factory
setting ("Stop").
>> HL-L2402D
>> HL-L2400DW/HL-L2400DWE/HL-L2442DW/HL-L2445DW/HL-L2447DW/HL-L2460DN/HL-L2865DW
HL-L2402D
1. Make sure that the front cover is closed and the power cord is plugged in.
2. Press
to turn on the machine and make sure only the Ready LED lights up.
3. Press Go seven times to turn the function On or Off.
All LEDs blink twice when you turn on the Continue Mode.
All LEDs blink once when you turn off the Continue Mode.
HL-L2400DW/HL-L2400DWE/HL-L2442DW/HL-L2445DW/HL-L2447DW/HL-L2460DN/
HL-L2865DW
1. Press a or b to select the following:
a. Select [General Setup]. Press OK.
b. Select [Replace Toner]. Press OK.
2. Press a or b to display [Continue] or [Stop], and then press Go.
Related Information
• General Settings
219
Bekijk gratis de handleiding van Brother HL-L2442DW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brother |
| Model | HL-L2442DW |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 20718 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Ingebouwd display | Ja |
| Gewicht | 6000 g |
| Breedte | 356 mm |
| Diepte | 360 mm |
