Handleiding
Je bekijkt pagina 10 van 63
INSTALLATION, USE & CARE INSTRUCTIONS
INSTALLATION
10
PREPARE THE CABINET (cont’d)
7. Measure the distance between both bottom bracket
edges (F) (FIG. 13). The table below shows the approriate
distance needed.
narroW eDge WiDe eDge
F
From 19-3/8”
to < 19-9/16”
F
From 19-9/16”
to 19-13/16”
If the measured distance needs to be shortened, screw two
no. 8-32 x 1/4” machine screws, in each bottom embossed
cabinet brackets hole; this will slightly bend the bottom part
of the brackets (FIG. 14). Screw both brackets until the
appropriate distance is obtained.
5¼"5¼"
3½"
3/4"
HH0318A
FIG. 15
CABINET BACK WALL
CABINET BOTTOM
horizontal exhaust installation only
This powerpack insert is factory shipped to exhaust vertically;
however, it is possible to make it exhaust horizontally (3¼” x 10”
ducting only).
8. Cut the hole for the horizontal exhaust through the back
wall of the cabinet using the dimensions shown. (FIG. 15).
F
HD1376
FIG. 13
F
HD1377
FIG. 14
Screws in bottom
embossed holes
Bekijk gratis de handleiding van Broan PMA400SS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Broan |
| Model | PMA400SS |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 8839 MB |
