Handleiding
Je bekijkt pagina 7 van 56
7
A
3.2 lOCATing THE uniT (COnT’d)
3. INSTALLATION (Cont’d)
Unit hUng to wall braCkEt
Trace a level line on the wall; align the wall bracket (the longer
one) to the line and secure this bracket to the wall using 4 provided
screws (1½” long) and washers, if using the slots on bracket).
VD0379
lEvEl linE wall braCkEt
VD0380
Using 1½” long provided screws, assemble both spacers to left and
right back bottom corner of the unit.
B
WARNING
VQ0010
!!
Ensure the wall bracket is attached to all of the
available studs, not into the drywall alone.
Lift the unit and hang it to the wall bracket. Ensure the bracket
assembled on back of the unit rests on the wall bracket.
VO0271
VO0272
Secure the unit to the wall using one 1½” long provided screw
through the small bracket.
CAUTION
Never use an electric screwdriver or
drill to screw the brackets to the unit;
use a standard screwdriver.
VR0086
VD0392
Using 3/8” long provided screws, mount the other bracket (A) to the
back of the unit; start with the 4 back screws, then 2 screws on top
left and right sides, then use the last center one to assemble the
last small bracket (B).
NOTE: These screws must be hand tightened.
Bekijk gratis de handleiding van Broan HRV200TE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Broan |
| Model | HRV200TE |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 8275 MB |
