Handleiding
Je bekijkt pagina 16 van 56
16
4. CONTROLS (Cont’d)
4.3 SETTing uniT OPERATiOn in THE REMAining 40 MinuTES On 20 Min/H MOdE And SETTing uniT dEfROST CyClE TyPE
uSing VT9W MAin WAll COnTROl
Press and hold the
MODE key for 3 seconds.
VQ0109
MODE
3 sec.
VQ0125
Two lines are flashing
to show Standby
(default configuration
setting).
The LCD screen will show one of these configurations:
OR
CONT
VQ0126
Recirculation arrows
are turning, rE
flashes and CONT
label appears to show
RECIRCULATION on
low speed.
OR
TURBO
VQ0127
Recirculation arrows
are turning, rE
flashes and TURBO
label appears to show
RECIRCULATION on
high speed.
MODE
VQ0128A
TURBO
OR
Use MODE or TURBO key to
see all 3 configurations.
VQ0121
% HUM
Press % HUM key to accept chosen
configuration and go to setting defrost
cycle type.
The LCD screen will show one of these defrost cycle types:
VQ0129
Sd (Standard)
(factory defrost cycle setting).
When needed, the unit will
perform defrost cycle on high
speed.
NOTE: This is the defrost type
used for the data published by
HVI.
OR
VQ0130
PL (Plus)
Use this cycle in cold region
(outdoor temperature -13°F and
lower). When needed, the unit
will perform defrost cycle on
high speed on a longer period
of time.
OR
VQ0131
dI (Discretion)
When needed, the defrost cycle
will be performed on the same
speed than the unit ventilation
speed. (e.g.: if the unit is set on
TURBO, the defrost cycle will
be done on high speed, and
if the unit is set on CONT, the
defrost cycle will be done on
low speed.
MODE
VQ0128A
TURBO
OR
Use MODE or TURBO key
to see all 3 defrost cycle type.
VQ0121
% HUM
Press % HUM key to accept
chosen defrost cycle type and
go to software version display
VQ0132
LCD screen alternates between the
house with circled arrows and the house
without arrow. The numbers under the
house are the software version number.
Press % HUM key OR
wait 10 seconds to exit
user setting menu.
VQ0121
% HUM
CAUTION
Set extended defrost on all units located in climates where the outdoor temperature typically remains below -13°F
(i.e. Bemidji, MN; Duluth, MN; Fargo, ND; Fairbanks, AK) over a 24-hour period for several days in a row, combined
with an indoor humidity of 40% or higher.
Bekijk gratis de handleiding van Broan HRV200TE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Broan |
| Model | HRV200TE |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 8275 MB |
