Brecknell SBI-240 handleiding
Handleiding
Je bekijkt pagina 23 van 79
SBI-240 Service Manual 21
4. To view the total accumulated data at any time, press and hold the ACC/
TOTAL key for 4 seconds.
Th
e number of accumulations and the accumulated sum total will be
alternately be displayed (weight or quantity) until the ACC/TOTAL key is
pressed again.
The number of accumulations and total values can be displayed or sent
to another device via the serial port by pressing and releasing the
PRINT/FUNC key.
5. To clear and reset the accumulated data, press and release the ZERO/ON/
OFF key while total accumulated data and the accumulated sum total a
re
alternati
vely displayed.
3.7 Count Mode
The counting function calculates and displays the piece quantity of the load that has
been weighed.
1. From normal weighing mode or percent-weighing mode, press and ho
ld the
PRINT/FUNC key f
or 4 seconds.
2. Use the keys to select COUNT.
3. Press the TARE/PRESET key to confirm and access the counting mode.
There are two ways to enter the piece weight. Find the preferred method and follow the
instructions below.
3.7.1 Enter a Known Piece Weight Directly
1. Press the UNIT/DATA key.
2. When InP.PWt is displayed, press the TARE/PRESET
key to access the
"Inpu
t Piece Weight" mode.
NOTE: When the HOLD function is enabled and working in PEAK HOLD mode, the
Accumulation function will automatically be disabled.
NOTE: In counting mode, the ZERO, TARE, PRINT, HOLD, PRESET TARE, ACC,
SETUP, and ON/OFF functions are all available.
NOTE: At any time you can press ZERO/ON/OFF to exit "Input Piece Weight" and
return to counting mode.
Bekijk gratis de handleiding van Brecknell SBI-240, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brecknell |
| Model | SBI-240 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9396 MB |
