Brecknell SBI-240 handleiding
Handleiding
Je bekijkt pagina 16 van 79
14 SBI-240 Service Manual
When the Model is NTEP certified, some functions will not be enabled
and the corresponding annunciator will not be displayed.
3.2 Keys
The keyboard consists of four keys, some of which have multiple functions.
Table 3.2 Function of the Keys
Pcs
Indicates counting mode. Unit of measure is pieces.
Hold
- Hold flashes - actual fluctuating weight displayed.
- Hold does not flash - locked weight is displayed.
HI
Data compare (check-weighing) is enabled. Current data (weight, pieces, or percent) is
above the specified upper limit.
OK
Indicates when data compare is enabled and current data (weight, pieces or percent) is
between the specified upper and lower limits.
LO
Data compare is enabled. Current data is below the specified lower limit.
LCD Annunciator Description
Key Mode Condition Function
Weigh, count, or percent Press for less than 3 seconds Enter or exit HOLD mode
Press for more than 3 seconds Enter Setup mode
Input data mode Press for more than 3 seconds Input decimal point
Press for less than 3 seconds Return to last sub-menu
Menu selection mode - Return to last sub-menu
Weigh, count, or percent Press for less than 3 seconds Sends output data via the serial port
Press for more than 3 seconds Selects mode: Weighing, Counting, or
Percent
Input data mode - Increases the digit in the flashing data entry
position by one
Menu selection mode - Returns to last item of current sub-menu
Bekijk gratis de handleiding van Brecknell SBI-240, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brecknell |
| Model | SBI-240 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9396 MB |
