Brecknell SBI 210-LCD handleiding
Handleiding
Je bekijkt pagina 17 van 29
AWT35-100109 Rev AB 17/29
AUTO
AUTO = if selected, acts as the AVERAG
mode and after each NLD.RNG zero, any
loads over (NLD.RNG),
is hold on the
display.
AVG.TIM
Average
1~60 5
Averages weights in Hold mode for: 1~60
seconds.
STB.TIM
Stable
3*AVG.TI
M ~ 255
15
Allows 3*(AVG.TIM) ~ 255 seconds for
stable conditions to be met in Hold mode.
HLD.TIM
Hold
0~
65535
0
Displays Hold mode weight for:
0 = until HOLD key pressed;
1~65535 = the scale exits the Hold mode
after 1 ~ 65535 seconds.
HLD.RNG
Oscillations
0~255 5
Sets the weight oscillation range that can
be averaged in Hold mode:
0 = any weight range can be averaged;
1~255 = only the weight which oscillates
within the 1 ~ 255 div range
can be
averaged.
NLD.RNG
No Load
Detected
Range
1~255 10
Sets the weight range that the indicator
considers as
the Zero range for the
relevant function e.g. Auto Hold Mode.
1~255 = the range of weight is 1 ~ 255
div.
Note: It must be above the Config-Motion
.
A.OFF.T 0~255 3
Sets the auto off time:
0 = disabled;
1~255 = if in standby mode for 1~ 255
minutes, turn the scale off.
LCD.BLT
AUTO
AUTO
Sets the LCD backlight:
Auto: if in standby mode for 10 seconds,
turn the display backlight off.
OFF：always off;
ON：always on.
OFF
ON
LCD.CST
CST1-5
CST5
Adjusts the LCD contrast
Bekijk gratis de handleiding van Brecknell SBI 210-LCD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brecknell |
| Model | SBI 210-LCD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4092 MB |
