Brecknell SBI 210-LCD handleiding
Handleiding
Je bekijkt pagina 16 van 29
AWT35-100109 Rev AB 16/29
FMT
See
Appendix
MULTPL
MULTPL
Com2 output content and format:
MULTPL = default format. See Appendix
;
SINGLE= only displayed content and
current status will be output, it’s
compatible with NCI-SCP01;
EH-SCP = command / response mode;
SCP-12 = only displayed content and
status will be output, it’s compatible with
NCI-SCP12(NCI3835);
Eh-sp2 = See Appendix
;
Lfuulf / ------ = special characters. Do not
use.
SINGLE
EH-SCP
SCP-12
Eh-sp2
Lfuulf
Lfuu--
Lf--lf
Lf----
--uulf
--uu--
----lf
------
BEEP
KEY
YES / NO
YES
Yes = enables the beep when a key is
pressed
COMPAR
mode
NONE
NONE
COMPARE function modes:
NONE = disabled.
L.LOW
IN.LMT
O.HIGH
OUT.LMT
HOLD
Function
HLD.MOD
NONE
AUTO
Enables the HOLD function mode:
NONE = disabled.
TOGGLE (Manual) = if selected, press the
HOLD key to enter HOLD mode. If the
weight is over (NLD.RNG) and stable
(STB.TIM), the data is hold on the display.
Press the HOLD key to exit the Hold mode.
AVERAG = if selected, the
weight over
(NLD.RNG), which variatio
n is less than
(HLD.RNG), it’s averaged
in (AVG.TIM)
and hold on the display. To exit this mode:
press the HOLD key or wait (HLD.TIM)
elapses.
TOGGLE
AVERAG
Bekijk gratis de handleiding van Brecknell SBI 210-LCD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brecknell |
| Model | SBI 210-LCD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4092 MB |
