Brecknell SBI-110 handleiding
Handleiding
Je bekijkt pagina 22 van 29
AWT35-501860 Issue AE.1 Page 22
6. Calibration
It is recommended to perform only the very first calibration following the function LF 1 in the
Supervisor Menu (page 19). To prevent any unintentional amendment of the scale configuration, all
the next Calibration should be performed by entering the Quick Calibration Menu (page 20).
6.1. Enabling the Calibration Procedures
The table shows how to enable/restrict access to User, Supervisor and Quick Calibration Menus.
User Menu
(UF functions)
Supervisor Menu
(LF functions)
Quick Cal. Menu
(ECF functions)
Cal. Switch NOT Sealed
LF 6 None
✔
✔
✔
Cal. Switch SEALED
LF 6 None
✔
✔
Password P 0020
✔
Note: ✔
*
No Gravitational adjustment allowed. The function UF-9 is locked.
For legal for trade applications the indicator may be sealed and removing this seal may
void the scale legal for trade stamping, this should only be carried out by a qualified
technician.
The switch is located on the bottom edge of the indicator main PCB board. (Fig. 6)
To change the Calibration Switch position, follow these steps:
i.Unplugged the PSU, remove the 4 screws of the case and carefully open the indicator.
ii.Shift gently the switch from left (SEALED) to the right (NOT SEALED) and vice versa.
Figure 6 – SBI-110 position of the Calibration Switch on the main PCB
6.2. Scale Calibration Procedure
The following procedures assume that the scale has been already properly configured [function LF 2],
including the settings of the Gravitational correction values [function LF 7] and Linearity correction
points [function LF 3] under the Supervisor Menu.
Note: perform the linearity procedure only if test weights applied to the scale between the zero and
span calibration points are showing slight inaccuracies, such as ± a few divisions. If large inaccuracies
are recorded, this indicates a possible mechanical problem or possible load cell failure which linearity
calibration may not be able to correct.
Bekijk gratis de handleiding van Brecknell SBI-110, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brecknell |
| Model | SBI-110 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6197 MB |
