Brecknell SBI-110 handleiding

29 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 14 van 29
AWT35-501860 Issue AE.1 Page 14
3.4.1. Setting the Checkweighing Limits
i. When the scale is ON, press PRINT and TARE keys together;
UF-1 will be displayed.
ii. Press TARE () key;
UF-2 will be displayed.
iii. Press PRINT() key;
iv. Enter or edit the LO limit value by pressing the ZERO(◄) and/or
TARE (►) keys to move the flashing digit left or right and press
the SELECT (▲) key to increase the numeric value;
v. Press the PRINT () key to confirm;
vi. Repeat points iv. and v. for the HI limit;
vii. Choose the beeper mode [000; 001; 002; see section 3.4.2
Table] by pressing ZERO(◄) and/or TARE (►) keys to move the
flashing digit left or right and press the SELECT (▲) key to
increase the numeric value;
viii. Press the PRINT () key to complete and leave the procedure;
ix. Press the UNITS (ESC) key to exit the User Menu.
To disable the Checkweighing mode, set the LO limit to 0 under the UF-2 menu and press
the PRINT () key to confirm. To exit the User Menu, press UNITS (ESC).
The LO and HI annunciators may vary. The illustration shows the annunciators displayed when
acceptable limits are entered for the first time.
3.4.2. Checkweighing Beeper Modes
There are three modes.
o 000
The beeper is disabled.
o 001
The beeper tones only when the load is within acceptable limits.
o 002
The beeper tones only when the load is outside the acceptable limits.
Please, ignore any other mode not listed above.
3.5. Hold Mode for Animal Weighing
This function can be used to capture and hold stable weight/pcs values. The indicator temporarily
freezes (Hold) the value on the screen for the user to view or record.
To enable the Hold mode, see chapter 3.5.1
To perform a Hold weighment, follow these steps:
1. Power up the scale and zero the display, if necessary, by pressing the ZERO key. Be sure the
scale is displaying weight in your preferred unit of measure. Press the UNIT key, if necessary.
2. Open the User Menu and select the Hold function [UF-5] to enable the option [Hold 1]. See the
instructions below.

Bekijk gratis de handleiding van Brecknell SBI-110, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkBrecknell
ModelSBI-110
CategorieNiet gecategoriseerd
TaalNederlands
Grootte6197 MB