Handleiding
Je bekijkt pagina 39 van 66
"COLD AREA" indicator
The sign opposite can be found in your fridge.
It clearly shows the coldest zone of your appliance, where the temperature is lower than
or equal to +4°C.
A temperature gauge in this zone allows you to check the settings of your fridge.
Adjust the thermostat
Temperature correct
Warning!
If the door of the fridge is left open for too long, the temperature inside the fridge will rise. Check the
temperature gauge within 30 seconds after opening the door to make sure that the reading is correct.
Temperature setting
Display
When powering on for the first time, the display will be displayed for 3 seconds, while the startup
bell will ring, and then the display will enter normal operation; (The temperature of the refrigerator
is set at 2 gear which mean 4°C when it is powered on for the first time).
Display the fault code when there is a fault (cyclic display); Display the set temperature of the
refrigeration room when there is no trouble.
When the refrigerated door is closed to open, the display board is bright, and it will be
extinguished within 30 seconds after the door is closed; Display board off state, press any key,
display board light, and then can be adjusted operation.
USE & TIPS
OK
Bekijk gratis de handleiding van Brandt BIL7755EN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brandt |
| Model | BIL7755EN |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 8244 MB |
