Handleiding
Je bekijkt pagina 22 van 52
OPERATION
Switch :
ON/OFF LIGHTING SWITCH: Press on this switch
to
turn on the lights, and press again to turn them off.
OFF MOTOR SWITCH: Press on this switch to stop
the motor operation.
SPEED SWITCH: Press on this switch, the motor
runs
at LOW speed.
SPEED SWITCH: Press on this switch, the motor
runs
at MEDIUM speed.
SPEED SWITCH: Press on this switch, the motor
runs
at HIGH speed.
REPLACING BULB
1.
Switch off the extractor hood and
isolate
the extractor hood by pulling
out the
mains plug or switching off
the fuse.
2.
Remove the grease filter.
3.
4.
Reconnect the power by inserting
the
mains plug or by switching on
the
fuse.
Replace the lamp (commercially)
led modules,separate ballast.
Max power Voltage Picture Lamp Cap ILCOS D code
1.5W
Square/Diameter:33.2mmx120mm
220-240V
22
DBS-1.5-
H-33.2/120
Self-ballasted
LED modules
Bekijk gratis de handleiding van Brandt BHC6601X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brandt |
| Model | BHC6601X |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 5885 MB |
