Brandson 307218 handleiding
Handleiding
Je bekijkt pagina 23 van 32
23English
5. Assembly
Remove the fan from the packaging and check the device and the scope of delivery
listed in the table. Please contact the seller if a part is missing or damaged.
1. To mount the fan correctly, rst screw on the stand (7, 8) with the outer tube
(6).
2. Take the stand (7) and screw the outer tube (6) to the stand using the fastening
(8) from below.
3. To connect the motor unit (1) to the inner tube (4), insert it into the inlet of the
fan control and fasten it with the inner tube fastening screw (3).
4. Now place the rear protecve grille (10) on the fan unit (9).
5. Screw the rear grille ght using the lock nut (11).
6. Then place the rotor blade (12) on the motor sha (9) and fasten it with the
appropriate fastening screw (13). Ensure that the individual components are
mounted properly on the motor sha (9) to avoid vibraons!
7. Align the catch on the top of the front protecve grille with the centre of the
top of the rear protecve grille.
11 Protecve grid lock nut
12 Rotor blade
13 Rotor fastening screw (lehand thread)
14 Guard grille ring (preassembled with the front guard grille)
15 Front protecve grille
16 Guard grille locking screw
Bekijk gratis de handleiding van Brandson 307218, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brandson |
| Model | 307218 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 2873 MB |
