Brandson 301775 handleiding
Handleiding
Je bekijkt pagina 15 van 48
15English
8. Seng the me
To set the daylight saving me, refer to chapter "13 Daylight saving me funcon"
in this user manual.
Proceed as follows to set the me:
• Press the "CLK" buon and then hold the "SET" buon for at least 5 seconds.
• The day in the display starts ashing. Press the "LEFT" or "RIGHT" buons
to set these accordingly. Press the "SET" buon again to conrm the entry.
• Next, you need to set the "hour". Then the hour on the display starts to
ash. You can select the desired hour using the "LEFT" or "RIGHT" buons.
Press the "SET" buon once you have set the desired hour.
• Aer seng the hour, you need to congure the "minutes". You can set the
desired "minutes" using the "LEFT" or "RIGHT" buons. Once you nish the
seng, press the "SET" buon to conrm.
• The me is now congured successfully. The mer goes back to the "CLK"
mode (me).
9. Creang the programs
Note: To ensure that the programs are executed properly, make sure that your
congured mers do not overlap. Be especially careful with the "BLOCK" funcon.
Programs with the command "OFF" are always priorized over the command "ON".
Likewise, the mer does not primarily detect the priority of the program number
but only the set me. Check the operang mode of the mer if you want to enable
the congured programs. The mer operang mode has to be set to "AUTO". In
addion, it is important to turn o the "RANDOM" and "COUNTDOWN" funcons.
Proceed as follows to create a program:
• Press the "RIGHT" buon to display the program menu. In this case, it is
"Program 1_ON". The rst "Switch on" program can now be congured.
Bekijk gratis de handleiding van Brandson 301775, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Brandson |
| Model | 301775 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5600 MB |
