Bowflex IC Bike SEi handleiding
Handleiding
Je bekijkt pagina 9 van 100
9
2. Release the Handlebar Post Adjustment Knob to lock the pop pin in the
desired hole in the Handlebar Post. Be sure that the pin is fully engaged and
fully tighten the adjustment knob.
NOTICE: Do not cut or pinch the cables.
3. To move the Handlebar closer to, or away from the seat, loosen the Handlebar
Slider Adjustment Handle. Slide the Handlebar to the desired position and fully
tighten the handle. Pull the handle down and turn so that it is aligned with the
Handlebar Track, then release.
Note: If the handle cannot turn due to conflict with another part, pull the handle, turn and
push it back in to reposition it. Continue turning as needed.
Power Up Mode
The Console will enter Power-Up mode if any button is pushed, or if it receives a signal from the RPM sensor as a
result of pedaling the machine.
Auto Shut-O (Sleep Mode)
If the Console does not receive any input in approximately 5 minutes, it will automatically shut o . The LED display
is o while in Sleep Mode.
Note: The Console does not have an On/Off switch.
Locking the Flywheel for Storage
When the machine is not in use, be sure to lock the Flywheel with the Emergency Brake/Resistance Adjustment
Knob. To lock the Flywheel, turn the Emergency Brake/Resistance Adjustment Knob clockwise until it encounters
an increase in resistance. Then rotate the Emergency Brake/Resistance Adjustment Knob another 1/2 turn
clockwise. The Flywheel is now locked. The fl ywheel should be locked for storage of the machine.
For safe storage of the machine, remove the power supply and place in a secure location. Tighten the
Brake/Resistance Adjustment Knob as described until the Flywheel is locked. Place the machine in a
secure location away from children and pets.
With the Flywheel locked, the level of resistance will be out of the range of operation displayed by the Console.
Do not use the machine with the level of resistance outside of the 0% - 100% range. This will damage the ability
to quickly stop the Flywheel during an emergency, and the e ectiveness of securing the bike for storage. Turn the
Emergency Brake/Resistance Adjustment Knob until the RESISTANCE displayed on the Console is less than 100%.
The resistance is now in the designed range of operation for the bike. .
Bekijk gratis de handleiding van Bowflex IC Bike SEi, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bowflex |
| Model | IC Bike SEi |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 47690 MB |
