Bowflex IC Bike SEi handleiding
Handleiding
Je bekijkt pagina 27 van 100
27
24. Final Inspection
Inspect your machine to ensure that all hardware is tight and components are properly assembled.
Do not use until the machine has been fully assembled and inspected for correct performance in
accordance with the Owner’s Manual.
19. Place the Crank Arm onto the Crank Shaft. Be sure
the Crank Arms are connected at 180° from each
other.
20. Add Loctite® 272 (or equivalent) to the inner
threads of the Crank Nut. Do not to apply the
Loctite® 272 to the Crank Shaft.
21. Install the Crank Nut onto the Crank Shaft, and
fully tighten it.
22. Confirm that the Pedal is fully tightened with the
Pedal Wrench.
23. Repeat with the other Pedal.
Note: Be sure to check the Pedals weekly to confirm
that they are fully tightened.
Since this machine operates with a fixed gear,
do not back, or reverse, pedal. Doing so may
loosen the Pedals, which could result in
damage to the machine and/or injury to the
user. Never operate this machine with loose
Pedals.
Crank Nut
Crank Shaft
Bekijk gratis de handleiding van Bowflex IC Bike SEi, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bowflex |
| Model | IC Bike SEi |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 47690 MB |
