Bowflex IC Bike SEi handleiding
Handleiding
Je bekijkt pagina 21 van 100
21
1. Unplug the AC Adapter from the wall outlet and
machine.
2. To check the Drive Belt tension, the bike needs to be
operated. Get the pedals rotating at about 20 RPM.
Then suddenly increase the RPM to your maximum
ability. If the pedals move normally with no slipping,
the tension is correct.
If the Pedals slip, the belt needs to be adjusted.
3. Carefully remove the Right Outside Shroud, using
small flathead screwdriver (or auto trim tool) to
disengage the inside tabs from the Main Assembly.
Note: To avoid damage to the surface of the Shrouds,
we recommend putting a piece of cloth over the screw-
driver blade.
Set the Outside Shroud safely aside.
Note: Your machine may not match the images provided exactly.
Right outside shroud - tab locations
Removing Right outside shroud (Crank arm not
shown)
Right outside shroud removed
Tensioning Tensioning
boltbolt
Flywheel Flywheel
bracketbracket
Inner shroudInner shroud
Bekijk gratis de handleiding van Bowflex IC Bike SEi, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bowflex |
| Model | IC Bike SEi |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 47690 MB |
