Boss RC-505MK2 handleiding
Handleiding
Je bekijkt pagina 6 van 26
6
Getting Ready
8
DC IN jack
Connect the included AC adaptor to this jack.
* Use only the specied AC adaptor (PSB-1U), connected to an AC
outlet of the correct voltage.
* Route the cord of the AC adaptor through
the grooves on the bottom of the unit as
shown in the illustration, to keep it in place.
* When turning the unit over, be careful so
as to protect the buttons and knobs from
damage. Also, handle the unit carefully; do not drop it.
[POWER] switch
Turns the power on/o.
USB port
Connect your computer using a commercially available USB cable
that supports USB 2.0.
You can connect your computer here and use it to back up or
recover data.
You can also use USB audio to play the sound from your computer
through this unit, and use USB MIDI to synchronize the tempo of
this unit with the DAW software on your computer.
9
MIDI
MIDI OUT, MIDI IN connectors
Connect an external MIDI device here.
This lets you control an external MIDI device from this unit via
MIDI.
10
CTL/EXP
CTL 1, 2/EXP 1 jack and CTL 3, 4/EXP 2 jack
You can connect an expression pedal or footswitches
(sold separately) to these jacks, for controlling a variety of
functions.
* Use only the specied expression pedal (FV-500H, FV-500L, EV-
30, and Roland EV-5; sold separately). By connecting any other
expression pedals, you risk causing malfunction and/or damage
to the unit.
11
OUTPUT
MAIN jacks (L/MONO, R)
SUB 1, 2 jacks (L/MONO, R)
Connect these jacks to your amp, monitor speakers or mixer.
MEMO
You can set the MAIN/SUB jacks as parallel output jacks
(mono output x 6) that individually output the sounds from each
track.
& “Parameter Guide” (PDF)
PHONES jack
Connect your headphones here.
MEMO
You can congure this unit to let you listen to only the audio you
specify in headphones.
& “Parameter Guide” (PDF)
12
INPUT
INST 1, 2 jacks (L/MONO, R)
Connect your guitar/bass, eect units, keyboards and other
instruments to these jacks.
MIC 1, 2 connectors
Connect your microphone(s) here.
* If you’re using a condenser mic that requires phantom power, turn
on this unit’s phantom power (p. 7).
Rear Panel (Connecting Your Equipment)
To AC outlet
Ground terminal
Connect this to an external earth
or ground.
Connect this if necessary.
8
9
10
11
12
Pin assignment
MIC 1, 2 connectors
1: GND
2: HOT
3: COLD
To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.
Bekijk gratis de handleiding van Boss RC-505MK2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Boss |
| Model | RC-505MK2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4872 MB |
