Handleiding
Je bekijkt pagina 6 van 86
6 • English DesignMax DM8SE • Installation Guide
BoseProfessional.com
Installation
Loudspeaker Orientation
Choose the loudspeaker orientation best suited
for your installation.
q Horizontal
w Vertical
q w
Installing the Bracket
Note: When choosing an installation location, at least two of the mounting bracket's attachment points
must be secured to a support structure. Attachment points not secured to a support structure must be
secured using appropriate hardware for the installation. Choose fasteners that are consistent with all local
building codes and requirements.
Note: Choose appropriate fasteners to support the weight of the loudspeaker (11.1 kg [24.5 lb]).
1. Mark the drill holes.
2. Drill four holes (sized for appropriate fasteners) into the wall.
3. Secure the bracket to the wall with four screws (not included). Note: Use M6 or 1/4-inch sized screws.
q w
Wiring the Connector
1. Feed the wires through the center hole of
the bracket.
2. Remove the connector from the
loudspeaker.
3. If using the weather-resistant input cover,
insert the wires through the bottom of the
input cover. See Preparing the Weather-
resistant Input Cover on page page 4.
4. Wire the connector. For wiring information,
see Wiring the Loudspeaker on page page
5.
q
Note: Installation in close proximity to cooking surfaces where the loudspeaker may be directly exposed to
cooking oils, such as in commercial cooking environments, may decrease the performance or functionality
of the loudspeaker.
Bekijk gratis de handleiding van Bose DesignMax DM8SE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bose |
| Model | DesignMax DM8SE |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 19390 MB |
