Handleiding
Je bekijkt pagina 5 van 86
English • 5Installation Guide • DM8SE
BoseProfessional.com
Installation
Wiring the Loudspeaker
Wire Gauge
The DesignMax DM8SE loudspeaker is designed to work with 18 AWG (0.8 mm
2
) to 14 AWG (2.1 mm
2
) size wire
only.
Connection Diagrams
Expose six millimeters (⁄ inch) of bare wire to attach to the terminals.
70V/100V
8
Note: The loudspeaker
is not rated for use with
a rigid conduit. The
loudspeaker is suitable for
a flexible conduit or wiring
connection only.
8Ω
8Ω
8Ω
8Ω
Loudspeaker Settings
70V
2.5W 5W 10W 20W 40W 80W*
8Ω
5W 10W 20W 40W 80W NC**
100V
** NC: No Connection (do not use)* Factory default
Transformer Tap Setting
Set tap by turning. Use a flat head screwdriver.
Using a Safety Cable
Some regional construction codes require the use
of a secondary method of securing loudspeakers
to support structures to provide additional
safety. Choose a mounting position, method, and
hardware consistent with local building codes and
regulations.
A safety cable can be attached to the loudspeaker
using the threaded insert on the back of the
enclosure.
The insert is sized for an M8 screw (not included)
with a depth of 20 millimeters (0.79 inches).
Bekijk gratis de handleiding van Bose DesignMax DM8SE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bose |
| Model | DesignMax DM8SE |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 19390 MB |
