Bosch WGB256A2GB handleiding
Handleiding
Je bekijkt pagina 48 van 60
en
48
Fault Cause and troubleshooting
E:30 -20 Critical malfunction.
▶ Turn off the water tap.
With this error message, the appliance starts a drain-
ing process.
1. Wait approx. 5 minutes until the draining process
ends.
2. Restart the appliance.
If required, start the draining process again.
3. If the fault persists, call customer service.
→Page54
Detergent dosage is too high.
▶ If you dose manually, reduce the amount of deter-
gent for the next washing cycle with the same load.
Additional water has been added.
▶ Do not add any extra water to the appliance while it
is operating.
All other error codes. Malfunction
1. To restart the appliance, press and hold for ap-
proximately 5seconds.
2. If the fault occurs again, disconnect the appliance
from the power supply for at least 30 seconds.
Unplug the appliance from the mains or switch off
the circuit breaker in the fuse box.
3. If the fault persists, call customer service.
→Page54
Please specify the exact error message when call-
ing. If possible, document the fault with photos and
videos.
The detergent drawer has not been pushed in fully.
▶ Push in the detergent drawer.
The pump unit is not inserted correctly.
▶ Check that the pump unit is inserted correctly.
→Page40
Bekijk gratis de handleiding van Bosch WGB256A2GB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bosch |
| Model | WGB256A2GB |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 5085 MB |
