Bosch VideoJet decoder 7000 handleiding
Handleiding
Je bekijkt pagina 12 van 24
12 en | Connection VIDEOJET decoder 7000
2024-11 | V01 | F.01U.420.692
Installation manual
Bosch Security Systems B.V.
5 Connection
5.1 Sequence of connections
!
Warning!
Do not connect the decoder to the power supply until all other connections have been
made. Otherwise the automatic assignment of the IP address will fail and a faulty monitor
resolution will be set. This may lead to serious damage of the unit.
5.2 Connecting monitors
You must connect a suitable monitor to the decoder. If mounting the unit to the back of a
monitor, use only monitors with standard VESA mount.
The unit provides two DisplayPorts (USB-C) and two HDMI ports as monitor outputs. All four
can be used at the same time.
i
Notice!
VGA connections are not supported. For connection to the LED monitors (listed as
accessories: UML-274-90, UML-324-90, UML-434-90, UML-554-90), make sure to use native
connections without converters. Connect the HDMI output via an HDMI cable to the HDMI
port on the monitor. Connect the DP (USB-C) output via a USB-C-to-DP cable to the DP
port on the monitor.
5.3 Establishing the network connection
You must connect the decoder to a 10/100/1000Base-T network using a standard UTP
category5 cable with RJ45 plugs.
4 Connect the unit to the network via the RJ45 socket.
When the decoder is powered after finalizing all connections, the LEDs on the RJ45 socket
light up to indicate that the network connection has been set up correctly. Flashing green,
the left LED signals that data packages are being transmitted over the network.
5.4 Connecting audio
The decoder has no dedicated audio port. Audio is transmitted digitally via monitor outputs.
5.5 Connecting the power supply
Power is supplied via a separate power supply unit that is part of the delivery. It offers 3
different power cords, one for use in the EU, one for China, and one for the USA.
!
Warning!
Use of improper power supply may lead to serious damage of the unit.
Use only the power supply unit that is included, together with the suitable power cord.
Connect the unit to an earthed mains socket-outlet.
Do not connect the decoder to the power supply until all other connections have been
made.
1. Connect the decoder to the power supply unit.
2. Select the suitable power cord and plug this into the power supply unit and then into
the mains.
The unit is now ready to use.
Bekijk gratis de handleiding van Bosch VideoJet decoder 7000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bosch |
| Model | VideoJet decoder 7000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1455 MB |
