Bosch Serie 6 MUMS6EW18 handleiding
Handleiding
Je bekijkt pagina 48 van 204
en Troubleshooting
48
Fault Cause and troubleshooting
"ALLOW APPLIANCE
TO COOL DOWN" ap-
pears on the display.
Motor is overheated.
1. Set the rotary switch to .
2. If you are processing a large quantity of ingredi-
ents, reduce the quantity to prevent overheating.
3. If a tool or accessory is blocked, remove the block-
age.
4. Allow the appliance to cool down to deactivate the
overload protection device.
"SCALE RESET" ap-
pears on the display.
Calibration of scales has failed.
1. Set up the appliance on a flat, clean work surface
free of vibrations.
2. Check there are no objects under the appliance.
3. Press to start calibration again, taking care not to
touch the appliance during calibration.
"MAX. WEIGHT
REACHED" appears
on the display.
Quantity of ingredients above measuring range of
scales.
1. When using the scales, observe the maximum
weight of 5000g or 11.00lb.
2. Reduce the total weight to be weighed.
"MIN. WEIGHT
REACHED" appears
on the display.
Quantity of ingredients outside measuring range of
scales.
1. When using the scales, observe the minimum
weight of 5g or 0.01lb.
2. Increase the total weight to be weighed.
Appliance is not set up correctly.
1. Set up the appliance on a flat, clean work surface
free of vibrations.
2. Check there are no objects under the appliance.
Bekijk gratis de handleiding van Bosch Serie 6 MUMS6EW18, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bosch |
| Model | Serie 6 MUMS6EW18 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17190 MB |
