Handleiding
Je bekijkt pagina 14 van 56
en-us Operation
14
This function is available for all cooking zones, provided
the other cooking zone on the same side is not in use.
Otherwise, and flash on the display for the selected
cooking zone. then switches on automatically.
Recommended applications
¡ Do not place a lid on the frying pan.
¡ Never leave pans unattended when they are heating up.
¡ Only use cold pans.
¡ Use pans with a completely flat base. Do not use pans
with a thin base.
Switching on ShortBoost
Requirement:Assign the function to .
→
"Favorite button", Page13
.
1. Select the cooking zone.
2. Touch .
a lights up.
a The function has now been activated.
Switching off ShortBoost
1. Select the cooking zone.
2. Select the power level.
a goes out
a The function is switched off.
Note:To avoid high temperatures, this function
automatically switches itself off after 30 seconds.
8.9 Keep warm function
1
You can use this function to melt chocolate or butter, and
to keep meals warm.
You can activate the function via Home Connect® or
Favorite button.
Switching on Keep warm function
Requirement:Assign the function to .
→
"Favorite button", Page13
.
1. Select the required cooking zone.
2. Touch .
lights up.
a The function is switched on.
Switching off Keep warm function
1. Select the cooking zone.
2. Set to
goes out.
a The function is switched off.
8.10 AutoChef®
This function allows you to melt, prepare sauces, sauté,
deep fry or fry while keeping the temperature under
control.
Instead of constantly adjusting the power level during
cooking, select the required target temperature once at the
start. The sensors under the glass ceramic measure the
temperature of the cookware and keep it constant
throughout the entire cooking process.
This function is available on the cooking zones marked
with the symbol .
Functions Temperature in°F(°C)
Melting 160-175 (70-80)
Sauces 230-250 (110-120)
Stir-frying 285 (140)
Deep-frying 320 (160)
Pan-frying 355-390 (180-200)
Grilling 430 (220)
Switching on AutoChef®
1. Place the empty cookware on a cooking zone.
2. Select the cooking zone.
3. Press .
a , and the preset temperature light up on the display
for the selected cooking zone.
a The temperature is displayed in °F by default. You can
change the display to °C in the basic settings.
→
"Basic settings", Page17
4. Select the temperature by swiping your finger over the
settings area.
a flashes until the set temperature is reached again.
a The selected temperature and the development of the
temperature reached in the pan flash alternately until
the selected temperature has been reached.
a The temperature shown on the displays is approximate
and may differ from the actual temperature in the frying
pan.
a Once the temperature has been reached, a signal tone
sounds, and as well as the temperature symbol stop
flashing.
5. Add the frying fat and then the food to the frying pan.
Note:If you need to cook with more than 250ml oil, add
the oil and wait a few seconds before you add the food.
Switching off AutoChef®
▶ Select the cooking zone and touch .
1
Available depending on software version. Further information on availability can be found on the website.
Bekijk gratis de handleiding van Bosch NIT8461UC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bosch |
| Model | NIT8461UC |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 6193 MB |
