Bosch GTC 12V-450 Professional handleiding

Niet gecategoriseerd

Bosch

359 pagina's

PDF beschikbaar

Handleiding

/ 359

Je bekijkt pagina 18 van 359

18 | English

u In case of damage and improper use of the battery, va-

pours may be emitted. The battery can set alight or ex-

plode. Ensure the area is well ventilated and seek medical

attention should you experience any adverse effects. The

vapours may irritate the respiratory system.

u If used incorrectly or if the battery is damaged, flam-

mable liquid may be ejected from the battery. Contact

with this liquid should be avoided. If contact accident-

ally occurs, rinse off with water. If the liquid comes

into contact with your eyes, seek additional medical

attention. Liquid ejected from the battery may cause ir-

ritation or burns.

u The battery can be damaged by pointed objects such

as nails or screwdrivers or by force applied externally.

An internal short circuit may occur, causing the battery to

burn, smoke, explode or overheat.

u When the battery is not in use, keep it away from pa-

per clips, coins, keys, nails, screws or other small

metal objects that could make a connection from one

terminal to another. A short circuit between the battery

terminals may cause burns or a fire.

u Only use the battery with products from the manufac-

turer. This is the only way in which you can protect the

battery against dangerous overload.

u Only charge the batteries using chargers recommen-

ded by the manufacturer. A charger that is suitable for

one type of battery may pose a fire risk when used with a

different battery.

Protect the battery against heat, e.g. against

continuous intense sunlight, fire, dirt, water

and moisture. There is a risk of explosion and

short-circuiting.

WARNING

Ensure that the coin cell is kept out

of the reach of children. Coin cells

are dangerous.

u Coin cells must never be swallowed or inserted into

any other part of the body. If you suspect that

someone has swallowed a coin cell or that a coin cell

has entered the body in another way, seek medical at-

tention immediately. Swallowing coin cells can result in

severe internal burns and death within 2 hours.

u Ensure that coin cell replacement is carried out prop-

erly. There is a risk of explosion.

u Only use the coin cells listed in this operating manual.

Do not use any other coin cells or other forms of electrical

power supply.

u Do not attempt to recharge the coin cell and do not

short circuit the coin cell. The coin cell may leak, ex-

plode, catch fire and cause personal injury.

u Remove and dispose of drained coin cell correctly.

Drained coin cell may leak and damage the product or

cause personal injury.

u Do not overheat the coin cell or throw it into fire. The

coin cell may leak, explode, catch fire and cause personal

injury.

u Do not damage the coin cell and take the coin cell

apart. The coin cell may leak, explode, catch fire and

cause personal injury.

u Do not allow damaged coin cells to come into contact

with water. Leaking lithium may mix with water to create

hydrogen, which could cause a fire, an explosion, or per-

sonal injury.

u If you cannot close the coin cell holder correctly and

fully, stop using the measuring tool, remove the coin

cell and have the measuring tool repaired.

u High temperature differences in a thermal image may

cause even high temperatures to be shown in a colour

associated with low temperatures. Coming into contact

with such an area may cause burns.

u Temperature measurements will only be correct if the

emissivity setting matches the emissivity of the ob-

ject. Otherwise, object temperatures could be shown to

be hotter or colder than they are, which may present a

danger if touched.

u Do not point the measuring tool directly at the sun or

at high-performance CO₂ lasers. This may damage the

detector.

u Protect the measuring tool, particularly the area

around the camera and infrared lens, from moisture,

snow, dust and dirt. The reception lens could fog up or

become contaminated and distort the measurements.

Incorrect settings on the tool and other atmospheric influ-

ences may make the measurements inaccurate. Object

temperatures could be shown to be hotter or colder than

they are, which may present a danger if touched.

Product Description and

Specifications

Please observe the illustrations at the beginning of this oper-

ating manual.

Intended Use

This thermal imaging camera is designed for the contactless

measurement of surface temperatures.

The displayed thermal image shows the temperature distri-

bution in the thermal imaging camera's field of view and

therefore enables temperature deviations to be depicted in

different colours.

When used correctly, this makes it possible to examine areas

and objects in a contactless manner for temperature differ-

ences and discrepancies in order to make components and/

or any weaknesses visible, including:

– Thermal insulation and other types of insulation (e.g. loc-

ating thermal bridges)

– Active heating and hot water pipes (e.g. underfloor heat-

ing) in floors and walls

1 609 92A 9ZG | (14.01.2025) Bosch Power Tools

/ 359

Bekijk gratis de handleiding van Bosch GTC 12V-450 Professional, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.