Bosch GRT 18V-40 Professional handleiding

Niet gecategoriseerd

Bosch

323 pagina's

PDF beschikbaar

Handleiding

/ 323

Je bekijkt pagina 35 van 323

English | 35

unexpectedly. Blade thrust can be controlled by the oper-

ator if proper precautions are taken.

u If the blade binds, or when interrupting a cut for any

reason, switch the machine off and hold the machine

motionless in the material until the blade comes to a

complete stop. While the blade is binding, never at-

tempt to remove the machine from the material or pull

the machine backward while the blade is in motion,

otherwise blade thrust may occur. Investigate and take

corrective actions to eliminate the cause of blade binding.

u Do not use blunt or damaged blades. Blunt or damaged

blades increase the risk of jamming or catching on an ob-

ject, resulting in blade thrust.

u Always maintain good visibility of the material being

cut. Blade thrust is more likely to occur in areas where it

is difficult to see the material being cut.

u If you are approached by another person while operat-

ing the machine, switch the machine off. There is an in-

creased risk of injury to other persons being struck by the

moving blade in the event of blade thrust.

Special Safety Warnings

u This tool contains magnets– keep away from implants

and other medical devices, e.g. pacemaker or insulin

pumps, magnetic storage media and magnetically

sensitive devices. The magnet generates a field that can

impair the function of the devices or lead to irreversible

data loss.

u Do not operate the machine on excessively steep

slopes. This reduces the risk of loss of control, slipping

and falling which may result in personal injury.

u Keep guards in place. Guards must be in working or-

der and be properly mounted. A guard that is loose,

damaged, or is not functioning correctly may result in per-

sonal injury.

u Never allow children, persons with physical, sensory or

mental limitations or a lack of experience and/or know-

ledge and/or people unfamiliar with these instructions to

use the machine. Local regulations may restrict the age of

the operator.

u Children should be supervised to ensure that they do not

play with the machine.

u Check the product for damage if it hits a hard object or in

case of excessive vibration.

u When shortening the cutting line, take care not to cut

yourself.

u When switching off the product, always make sure that

the motor and cutting head have come to a complete

standstill.

u Cut high and dense grass in stages to achieve uniform cut-

ting results.

u The dome washer(25) is used to slightly support the

product during use to protect the blade from obstacles

such as trees.

u When inserting the battery, make sure that the cutter

does not make contact with your body and other objects,

including the floor. The cutter may rotate during start-up

and cause injury or damage to the product and/or ob-

jects.

u Do not over reach and keep your balance at all times. Al-

ways be sure of your footing on slopes. Walk, never run.

u In case of prolonged use, we recommend to take appro-

priate breaks.

u Replace the cutting head if it is damaged or has reached

the wear limit.

u Keep your hands away from all sharp devices that can

shorten the line.

u Do not wear multiple shoulder harnesses simultaneously.

u Make sure that no other garment obstructs you when put-

ting on or taking off a shoulder harness.

Recommendations for Optimal Handling of the

Battery Pack

u Do not open the battery. There is a risk of short-circuit-

ing.

Protect the battery against heat (e.g.,

against continuous intense sunlight), fire,

water, and moisture. There is a risk of explo-

sion.

u When not using the machine detach the battery away

from paper clips, coins, keys, nails, screws, or other

small metal objects that could cause bridging of the

terminals. Shorting the battery terminals together may

cause burns or a fire.

u In case of damage and improper use of the battery

pack, vapours may be emitted. Ventilate the area and

seek medical help in case of complaints. The vapours can

irritate the respiratory system.

u Only use the battery with products from the manufac-

turer. This is the only way in which you can protect the

battery against dangerous overload.

u The battery can be damaged by pointed objects such

as nails or screwdrivers or by force applied externally.

An internal short circuit may occur, causing the battery to

burn, smoke, explode or overheat.

u Do not short-circuit the battery. There is a risk of explo-

sion.

u Occasionally clean the venting slots of the battery using a

soft, clean and dry brush.

u Charge the machine only with the supplied battery

charger.

Symbols

The following symbols are important for reading and under-

standing the original instructions. Please take note of the

symbols and their meaning. The correct interpretation of the

symbols will help you to use the product in a better and safer

manner.

Bosch Power Tools F 016 L94 625 | (12.11.2024)

/ 323

Bekijk gratis de handleiding van Bosch GRT 18V-40 Professional, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.