Bosch GMC 600-15 Professional Handleiding (363 Pagina's)

Handleiding

/ 363

Je bekijkt pagina 24 van 363

24 | English

Operation

Starting Operation

u Never leave the measuring tool unattended when

switched on, and ensure the measuring tool is

switched off after use.

u Protect the measuring tool from moisture and dir-

ect sunlight.

u Do not expose the measuring tool to any extreme

temperatures or variations in temperature. For ex-

ample, do not leave it in a car for extended periods of

time. In case of large variations in temperature, allow

the measuring tool to adjust to the ambient temperat-

ure before putting it into operation. The precision of

the measuring tool may be compromised if exposed to

extreme temperatures or variations in temperature.

u Avoid substantial knocks to the measuring tool and

avoid dropping it.

Switching On and Off

Turn the rotary switch(3) to the required measuring

function to switch on the measuring tool.

Turn the rotary switch to the position to switch off

the measuring tool.

If no value is measured for approx. 20min or no button is

pressed or the rotary switch is not adjusted, the measur-

ing tool will automatically switch itself off to preserve the

non-rechargeable batteries. To disable automatic shut-

down, press and hold the Hold button while switching on

the measuring tool (e.g. by turning the rotary switch to

any position). d.APO will then appear in the display.

You can then switch the measuring tool back on by turn-

ing the rotary switch(3) or pressing one of the buttons.

Buttons

Hold Button

"Freezing" a Value on the Display

Briefly press theHold button to "freeze" the measured

value on the display(1). Hold is shown on the display

and an audio signal is output.

Briefly press theHold button again to re-enable the

display(1).

Switching Sound Off/On

Press and hold the Hold button to switch off the sound

output. The symbol is shown on the display.

Press and hold the Hold button again to switch on the

sound output again.

Do not use the Hold button when determining the

voltage. The voltage displayed does not change

and there is a risk of injury due to electric shock.

Connecting/Disconnecting Test Leads

Always connect the black test lead(10) to the COM

input terminal first, and then connect the red test

lead(9) to the (+) input terminal. Proceed in reverse

when disconnecting the test leads.

1 609 92A A6W | (20.01.2025) Bosch Power Tools

/ 363

Bekijk gratis de handleiding van Bosch GMC 600-15 Professional, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.