Bosch GFP 18V-10 Professional handleiding

Niet gecategoriseerd

Bosch

291 pagina's

PDF beschikbaar

Handleiding

/ 291

Je bekijkt pagina 22 van 291

22 | Français

– After working, press the locking mechanism(4) from

right to left to prevent grease from escaping unintention-

ally.

Worklight

The LED worklight(1) illuminates the work area in poor light-

ing conditions.

– To switch the worklight on, press the on/off switch of the

worklight(3).

If the grease gun is not operated when the worklight is

switched on, the worklight switches off again automatic-

ally after some time.

– To switch the worklight off, press the on/off switch of the

worklight(3) again.

Working Advice

u Comply with the manufacturer's instructions regard-

ing the greases! Certain greases can only be used in a

certain temperature range.

u Open and use the cartridges in accordance with the

manufacturer's specifications.

u The brackets for the shoulder strap do not act as fall

protection. Use the brackets(15) only to attach a

shoulder strap.

Greasing (seefigureK)

– Fill the power tool with grease.

– Install the required nosepiece: (31)/(32).

– Set the required gear (switch(7)).

– If required, set the number of pump strokes

(thumbwheel(2)).

– Connect the nosepiece to the lubrication point.

– Unlock the on/off switch (locking mechanism(4)).

– Switch the power tool on (on/off switch(6)).

– Once the required grease quantity has been applied to

the lubrication point, switch the power tool off.

Once the set number of pump strokes has been reached,

the power tool switches off automatically.

Pressure relief valve

The pressure relief valve(18) opens if the working pressure

exceeds the maximum pressure of 10,000psi during greas-

ing. Grease is drained into the cap of the pressure relief

valve, and the power tool switches off automatically.

– Switch the power tool off.

– Inspect the lubrication point and the hose(19) for pos-

sible blockages.

Once any faults have been rectified, work can continue as

normal.

Maintenance and Service

Maintenance and Cleaning

u Before carrying out any work on the power tool (e.g.

maintenance, tool change etc.), remove the battery

from the power tool. There is risk of injury from uninten-

tionally pressing the on/off switch.

u To ensure safe and efficient operation, always keep

the power tool and the ventilation slots clean.

After-Sales Service and Application Service

Great Britain

Tel. Service: (0344) 7360109

Malaysia

Tel.: (03) 79663194

You can find our service addresses and links to

the repair service and spare parts ordering at

www.bosch-pt.com/serviceaddresses

In all correspondence and spare parts orders, please always

include the 10‑digit article number given on the nameplate

of the product.

Disposal

Power tools, rechargeable batteries, accessories and pack-

aging should be sorted for environmental-friendly recycling.

Do not dispose of power tools and batteries/re-

chargeable batteries into household waste!

Only for EU countries and United Kingdom:

Electrical and electronic equipment or used batteries that

are no longer suitable for use must be collected separately

and disposed of in an environmentally friendly manner. Use

the designated collection systems.Incorrect disposal may

cause harmful effects on the environment and human health,

due to the potential presence of hazardous substances.

Français

Consignes de sécurité

Avertissements de sécurité généraux pour l’outil

électrique

AVERTISSE-

MENT

Lire tous les avertissements de sé-

curité, les instructions, les illustra-

tions et les spécifications fournis

avec cet outil électrique. Ne pas suivre les instructions

énumérées ci-dessous peut provoquer un choc électrique,

un incendie et/ou une blessure sérieuse.

Conserver tous les avertissements et toutes les instruc-

tions pour pouvoir s'y reporter ultérieurement.

Le terme "outil électrique" dans les avertissements fait réfé-

rence à votre outil électrique alimenté par le secteur (avec

cordon d’alimentation) ou votre outil électrique fonctionnant

sur batterie (sans cordon d’alimentation).

1 609 92A 9T8 | (17.03.2025) Bosch Power Tools

/ 291

Bekijk gratis de handleiding van Bosch GFP 18V-10 Professional, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.