Bosch GDM 600-15 Professional handleiding

532 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 31 van 532
English | 31
ing the rotation switch to any position). d.APO will then appear in the
display. The idle state is always disabled in Min Max Avg mode.
You can then switch the Digital Multimeter back on by turning the rota-
tion switch (2) or pressing one of the buttons.
Buttons
Sel Button
Briefly press the Sel button to switch between two measuring func-
tions that have the same position on the rotation switch(2). The re-
spectively selected measuring function is shown on the display(1).
If the position on the rotation switch is not doubly assigned, an
audio signal is output when the Sel button is pressed.
Range Button
Disconnect the test leads (7) and (8) from the circuit to be tested
before adjusting the measuring range. Failure to do so poses a
risk of injury from electric shock and/or damage to the Digital Multi-
meter.
Briefly press the Range button within the automatic measuring range
selection to switch to the manual measuring range selection. Manual
is shown on the display(1).
Briefly press the Range button within the manual measuring range
selection to run through various measuring ranges.
Press and hold the Range button within the manual measuring range
selection to switch back to the automatic measuring range selection.
Auto is shown again on the display(1).
MinMax Button
Briefly press the MinMax button to show the minimum, maximum or
mid-point values of the measurements. Min, Max or Avg is shown on
the display.
Hold Button
"Freezing" a Value on the Display
Briefly press theHold button to "freeze" the measured value on the
display(1). HOLD is shown on the display and an audio signal is out-
put.
Briefly press theHold button again to re-enable the display(1).
Switching Sound Off/On
Press and hold the Hold button to switch the sound output of the Di-
gital Multimeter off. The symbol is shown on the display.
Press and hold the Hold button again to switch the sound output of
the Digital Multimeter back on.
Bosch Power Tools 1 609 92A 9PT | (07.02.2025)

Bekijk gratis de handleiding van Bosch GDM 600-15 Professional, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkBosch
ModelGDM 600-15 Professional
CategorieNiet gecategoriseerd
TaalNederlands
Grootte45142 MB