Bosch GCL 12V-50-22 CG Professional Handleiding (717 Pagina's)

Handleiding

/ 717

Je bekijkt pagina 52 van 717

52 | English

Working with the Holder LB10

You can secure the measuring tool on vertical surfaces or magnetisable materials using

the holder(23). In conjunction with the ceiling clip(21), the measuring tool can also be

aligned vertically.

u Keep your fingers away from the rear side of the magnetic accessory while at-

taching the accessory to surfaces. The strong pulling force of the magnets may jam

your fingers.

Roughly align the holder(23) before switching on the measuring tool.

Working with the Laser Receiver (seefigureJ)

Use the laser receiver(26) to improve detection of the laser lines in adverse lighting con-

ditions (bright environment, direct sunlight) and over greater distances.

All operating modes are suitable for operation with the laser receiver(26).

Laser Goggles

The laser goggles filter out ambient light. This makes the light of the laser appear brighter

to the eye.

u Do not use the laser goggles (accessory) as protective goggles. The laser goggles

make the laser beam easier to see; they do not protect you against laser radiation.

u Do not use the laser goggles (accessory) as sunglasses or while driving. The laser

goggles do not provide full UV protection and impair your ability to see colours.

Example applications (see figuresE–K)

Examples of possible applications for the measuring tool can be found on the graphics

pages.

Maintenance and Service

Maintenance and Cleaning

Keep the measuring tool clean at all times.

Never immerse the measuring tool in water or other liquids.

Wipe off any dirt using a damp, soft cloth. Do not use any detergents or solvents.

The areas around the outlet aperture of the laser in particular should be cleaned on a reg-

ular basis. Make sure to check for lint when doing this.

Only store and transport the measuring tool in the protective bag(30) or the case(31).

If the measuring tool needs to be repaired, send it off in the protective bag(30) or the

case(31).

1 609 92A 9B1 | (14.08.2024) Bosch Power Tools

/ 717

Bekijk gratis de handleiding van Bosch GCL 12V-50-22 CG Professional, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.