Bosch GCL 12V-50-22 CG Professional Handleiding (717 Pagina's)

Handleiding

/ 717

Je bekijkt pagina 49 van 717

English | 49

– Place the measuring tool 2.5m away from the door opening on a firm, flat surface (not

on a tripod). Switch on the measuring tool and select vertical line mode. Aim the laser

line at the door opening and allow the measuring tool to level in.

2,5 m

– Mark the centre of the vertical laser line

on the floor of the door opening

(pointⅠ), 5m away on the other side of

the door opening (pointⅡ) and on the

upper edge of the door opening

(pointⅢ).

d

2 m

– Rotate the measuring tool 180° and pos-

ition it on the other side of the door

opening, directly behind pointⅡ. Allow

the measuring tool to level in and align

the vertical laser line in such a way that

its centre passes through pointsⅠ andⅡ

exactly.

– Mark the centre of the laser line on the upper edge of the door opening as pointⅣ.

– The discrepancy d between the two marked pointsⅢ and Ⅳ reveals the actual ver-

tical deviation of the measuring tool.

– Measure the height of the door opening.

You can calculate the maximum permitted deviation as follows:

Doubled height of the door opening×0.3mm/m

Example: At a door opening height of 2m, the maximum deviation amounts to

2×2m×±0.3mm/m=±1.2mm. The pointsⅢ and Ⅳ must therefore be no further

than 1.2mm from each other.

Checking Plumb Accuracy

For this check, you will need a clear measuring space on firm ground with a distance of

approx. 5m between the floor and the ceiling.

Bosch Power Tools 1 609 92A 9B1 | (14.08.2024)

/ 717

Bekijk gratis de handleiding van Bosch GCL 12V-50-22 CG Professional, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.