Bosch FLEXIDOME panoramic 5100i handleiding

Bewakingscamera

Bosch

64 pagina's

PDF beschikbaar

Handleiding

FLEXIDOME panoramic 5100i | FLEXIDOME

panoramic 5100i IR

Configuration | en 33

Bosch Security Systems B.V.

User manual

2024-11 | V03 | F.01U.385.628

Intensity level region 1 to 5

(Only applicable to FLEXIDOME panoramic 5100i IR)

The device has 5 controllable IR zones. You can individually control the intensity of the IR

LEDs. To do so, adjust the sliders from 0 to +30.

Region 1 is always in the center. Regions 2, 3, 4, and 5 are outer parts of the visible scene.

If the lens is rotated mechanically, it will be positioned differently in relation to the IR LEDs.

If adjusted correctly, regions 2, 3, 4, and 5 shown in the image match the IR zones from the

camera.

5.4.8 Enhance

Backlight compensation

– Select Off to switch off backlight compensation.

– Select On to capture details in high-contrast and extremely bright-dark conditions.

Intelligent Defog

– Select Off to disable the feature.

– Select Auto to activate the Intelligent Defog feature automatically as needed.

– Select Extreme to use higher contrast and allow better visibility in extremely foggy

scenes.

Notice!

If the Extreme option is selected in scenes without fog, it could potentially result in images

with too high contrast

Contrast enhancement

Use the slider to adjust the contrast enhancement level.

Sharpness level

The slider adjusts the sharpness level between -15 and +15. The zero position of the slider

corresponds to the factory default level.

A low (negative) value makes the picture less sharp. Increasing sharpness brings out more

detail. Extra sharpness can enhance the details of license plates, facial features and the

edges of certain surfaces but will increase bandwidth requirements.

Temporal noise filtering

Adjusts the Temporal noise filtering level between -15 and +15. The higher the value, the

more noise filtering.

Spatial noise filtering

Adjusts the Spatial noise filtering level between -15 and +15. The higher the value, the

more noise filtering.

5.4.9 Scene mode scheduler

The scene mode scheduler is used to determine which scene mode should be used during

the day and which scene mode should be used during the night.

1. Select the mode you wish to use during the day from Marked range drop-down box.

2. Select the mode you wish to use during the night from Unmarked range drop-down

box.

3. Use the two slider buttons to set the Time ranges.

To set the Marked range as the single mode of the device, select the complete time range.

The text “Always” will appear after the Marked range menu.

Click Set to apply the changes.

Bekijk gratis de handleiding van Bosch FLEXIDOME panoramic 5100i, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.