Boretti Milano MLI94D handleiding
Handleiding
Je bekijkt pagina 53 van 72
53
To remove the RH and LH sliding guides from the wire support:
* Find the safety locks. These are the tabs that clip over the fixing
wire (arrow 1 in fig. 7.8).
* Pull the safety locks away from the fixing wire to release the sliding
guide (arrow 2 in fig. 7.8).
Cleaning the sliding shelf supports:
* Wipe the supports with a damp cloth and a mild detergent only.
* Do not wash them in the dishwasher, immerse them in soapy
water, or use oven cleaner on them.
ENBoretti Milano / User guide - Installation advice
Important
When installing the sliding shelf support, make sure that:
* You fit the RH and LH sliding guides on the wire support (fig. 7.4).
* You press the RH and LH sliding guides against the fixing wires
(fig. 7.5). You will hear a click as the safety locks clip over the wire.
* You fit the oven shelf above the sliding shelf support (figs. 7.6, 7.3).
* You slide, on the guides inside the oven cavity, the sliding shelf
support with the oven shelf fitted above:
* the oven shelf shall run out towards the oven door;
* do not use the top shelf position;
* the short bend on the wire support shall face the inside of the oven;
* the oven shelf must be fitted so that the guard rail faces the inside of the
oven.
Telescopic sliding shelf supports (fig. 7.4)
The telescopic sliding shelf support makes it safer and easier to
insert and remove the oven shelf. It stops when it is pulled out to the
maximum position.
Bekijk gratis de handleiding van Boretti Milano MLI94D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Boretti |
| Model | Milano MLI94D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6251 MB |