Boretti Milano MLI94D handleiding
Handleiding
Je bekijkt pagina 52 van 72
52
OVEN FITTING OUT
* Hang up the wire racks “G” on the oven
walls (fig. 7.11) .
In the left oven only interpose the catalytic
panels “A” (fig. 7.12).
* Slide into the guides, the shelf and the
tray (fig. 7.2).
* The rack must be fitted so that the safety
notch, which stops it sliding out, faces the
inside of the oven; the guard rail shall be at
the back. Todismantle, operate in reverse
order.
ENBoretti Milano / User guide - Installation advice
ADVICE FOR USE AND MAINTENANCE OF SELF CLEANING
PANELS
Left oven only
The self cleaning panels are covered with a
special microporous enamel which, absorbs
and removes oil and fat splashes
during normal baking over 200°C. If, after
cooking very fatty foods, the panels remain
dirty, operate the oven empty on max
temperature for about 30 minutes. These
panels do not require to be cleaned, however it
is advised to periodically remove them from
the oven (at least the side panels) and to wash
them with tepid
soapy water and then wipe off with a soft
cloth.
DO NOT CLE
AN OR WASH THEM
WITH ABRASIVE PRODUCTS OR WITH
PRODUCTS CONTAINING ACIDS OR
ALKALIS.
The side panels are reversible and when the
microporous enamel degrades, they can be
turned to the other side.
A
G
LEFT OVEN
ONLY
G
Bekijk gratis de handleiding van Boretti Milano MLI94D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Boretti |
| Model | Milano MLI94D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6251 MB |