Handleiding
Je bekijkt pagina 38 van 56
Configuration menu
EN
38 bora.com
Fig.6.7
Perform data export
u
Press the fan knob until the second acoustic signal is heard.
u
Follow the prompt by turning the knob ring at least 90° clockwise.
T
You have reached the configuration menu when “ ” is
displayed.
u
Turn the knob ring clockwise to menu item “ ”.
u
Start the update by briefly touching “ ”.
T
During data export, “ ” is displayed on the control knob.
T
When the data export is complete, “ ” is displayed on the
control knob.
T
If an error occurs during the data export, “ ” is displayed.
u
Acknowledge this by tapping the display.
u
Remove the USB stick from the appliance.
Checking the software version
Wait at least 2 minutes between updating the software and
checking the software version.
Fig.6.8
Checking the software version
u
Press the fan knob until the second acoustic signal is heard.
u
Follow the prompt by turning the knob ring at least 90° clockwise.
T
You have reached the configuration menu when “ ” is
displayed.
u
Turn the knob ring clockwise to menu item “ ”.
u
Start the update by briefly touching “ ”, the current software
version is displayed.
u
Turn the knob ring clockwise to display the software version of the
corresponding component (cooktop on the left, cooktop extractor
or cooktop on the right)
T
The software version displayed must match the software version of
the files on your USB stick.
T
You can exit the menu by turning the knob ring until you see “End”
and then tapping the display.
Troubleshooting
T
If the “ ” in menu item “ ” is not lit up, the system was
unable to detect a USB stick.
T
If the “ ” in menu item “ ” is not lit up, the system was unable
to detect a USB stick.
If the USB stick is not detected or the error messages “ “ / ”
” appear, the following steps must be taken:
u
Remove the stick for 5 seconds and then reinsert it. It can take up
to 5 seconds for the USB stick to be detected.
or
u
Leave the stick in the appliance and switch off the power supply
for 1minute.
u
If necessary, reformat the USB stick to FAT32 and copy the files as
indicated.
Troubleshooting if an update fails “ ”
u
The file names of the update files must not be modified (especially
“__.upd”).
u
Check that all files are on the stick and have not been moved to a
folder.
u
Call up the configuration menu “ ” and insert the USB stick.
6.4.10
Menu item Cc: data export
u
Start the data export by touching the display.
6.4.11
Menu item Cd: software version
indicator
The software currently used for all connected appliances is shown:
T
left cooktop
T
Cooktop extractor
T
right cooktop
It is shown as follows:
Indicator 1
(appliance)
Indicator 2 (software version)
xxx (= left cooktop software version)
xxx (= cooktop extractor software version)
xxx (= right cooktop software version)
Tab.6.14
software version indicator
The software versions are displayed one after the other by twisting
the control knob clockwise. The menu then closes.
Bekijk gratis de handleiding van Bora PKFI3AB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bora |
| Model | PKFI3AB |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 9839 MB |
