Handleiding
Je bekijkt pagina 18 van 56
Appliance description
EN
18 bora.com
Adhere to the dimensions in the table:
Burner Minimum pan
diameters
Recommended pan
diameter
Normal burner 120 mm 140–200mm
High-power burner 160 mm 180–240mm
Tab.3.11
Pan diameters
The heating and heat-through times for the cookware base, as
well as the cooking results, are significantly influenced by the
structure and material of the cookware. Cookware with a
thick base ensures more even heat distribution. In the case of
a thin base there is a risk of the food becoming overheated in
places. The cooktop may also become damaged.
Take special care not to overheat the cookware as the base
can become deformed. For this reason, you should never heat
up cookware when empty.
Cookware with an uneven base may tip over. A slight wobble
can never be completely ruled out.
Only use cookware with a diameter that is within the given
dimensions. If the diameter is too large, the hot gases flowing
outwards from under the base may damage the worktop or
any non-heat-resistant wall, e.g. with panelling, as well as part
of the cooktop and the cooktop extractor. Bora shall not be
held liable for any such damage.
3.5
Safety features
3.5.1
Anti-trap protection
The electrical cover flap on the cooktop extractor has anti-trap
protection. If the cover flap is obstructed when opening or closing, it
automatically stops moving. The cover flap returns to the starting
position and tries again. If the anti-trap protection is triggered again,
an error message appears on the control knob
(see"8Troubleshooting").
3.5.2
Safety shut-down
If an appliance is switched on but is not used for a predefined time, it
is automatically switched off.
Cooktop extractor
The cooktop extractor is automatically switched off after an operating
time of 120 minutes without any change to the power level.
Cooktops
Each cooking zone is switched off automatically when the cooking
zone exceeds the maximum operating duration on one power level or
heat retention level. is also
displayed (residual heat indicator).
u
Switch the appliance back on if you wish to use it again after safety
shut-down.
Safety shut-down on the different power levels
Power levels Safety shut-down after hours:minutes
PKFI3, PKI3, PKIW3,
PKG3
PKC3, PKCB3, PKCH3
8:24 6:00
6:24 6:00
5:12 5:00
4:12 5:00
3:18 4:00
2:12 1:30
2:12 1:30
1:48 1:30
1:18 1:30
Tab.3.12
Safety shut-down on the different power levels
After 10 minutes (20 minutes on PKG3), the power setting is
automatically switched back to power level 9.
Safety shut-down on the different power levels
Power levels Safety shut-down after hours:minutes
PKT3
(Cleaning function
70 °C)
0:10
-
8:00
8:24
6:24
5:12
4:12
3:18
2:12
2:12
1:48
1:18
Tab.3.13
Safety shut-down in the different temperature ranges
After 10 minutes, the power setting automatically reverts to
230°C.
PKFI3, PKI3, PKIW3, PKG3, PKC3, PKCB3, PKCH3:
heat retention level Switch off after hours:minutes
1 ( )
8:00
2 ( )
8:00
3 ( )
8:00
Tab.3.14
Safety shut-down on the different heat retention levels
3.5.3
Residual heat indicator
If a cooking or grilling zone is still hot after switching off, there is a
risk of burns or fire. While
is displayed (residual heat indicator), do
not touch the cooking or grilling zone or place any heat-sensitive
objects on top of it. After a sufficient cooling period the indicator will
go out.
Bekijk gratis de handleiding van Bora PKCB3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bora |
| Model | PKCB3 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 10414 MB |
