Handleiding
Je bekijkt pagina 19 van 56
Appliance description
EN
bora.com 19
Noises
The following noises may occur in the cookware when using induction
cooking zones, depending on the material and the finish of the base:
T
Humming may occur when using a high power level. This decreases
or disappears when the power level is decreased.
T
Crackling or whistling may occur due to cookware bases being
made of different materials (e.g. sandwich base).
T
Clicking sounds may occur during electronic switching procedures,
especially at low power levels.
T
Whirring may occur when the cooling fan is switched on. In order
to increase the service life of the electronic system, the cooktop is
equipped with a cooling fan. The cooling fan switches on
automatically if the cooktop is used intensively. You will hear a
whirring sound. The cooling fan may continue to run after the
appliance has been switched off.
3.3.4
How the Hyper and HiLight
cooktops work
Under the cooking zone is a radiant heating element with a heating
tape. When the cooking zone is switched on, the heating tape
generates radiant heat, which radiates to the cooking zone and heats
it up.
Power levels
Activity Power level
Melting butter and chocolate, breaking up gelatine
Keeping sauces and soups warm, soaking rice
-
Cooking potatoes, pasta, soups and ragouts,
steaming fruit, vegetables and fish, defrosting food
-
Frying in coated pans, moderate frying (without
overheating the fat) of pork cutlets or fish
-
Heating up fat, browning meat, cooking thickened
sauces and soups, making omelettes
-
Cooking large amounts of liquids, grilling steaks
and heating water
Heating up water
Tab.3.12
Recommendations for power levels
The specifications provided in the table are standard values.
Depending on the cookware and filling quantity, it is recommended to
either decrease or increase the power level.
Power setting on the Hyper cooktop
The front cooking zone on the Hyper glass ceramic cooktop is fitted
with a temporary power setting.
T
is displayed.
The power setting can be used in order to quickly heat up large
quantities of water. If the power setting is activated, the cooking
zones will run at extra high power. After 10 minutes, the cooking zone
automatically switches back to power level 9.
Suitable cookware
Cookware with this symbol is suitable for radiant heating
elements. The cookware used for radiant heating surfaces must be
metal and have good heat conducting properties.
Suitable cookware is made of:
T
stainless steel, copper or aluminium
T
enamelled steel
T
cast iron
u
Pay attention to the cookware base. The bottom of the cookware
should not show any sign of curvature. Due to incorrect hob
temperature monitoring, this curvature may cause the cookware to
overheat. To avoid scratching the cooktop, the base of the
cookware must not have any sharp grooves or sharp edges.
u
Place the cookware (without a mat or similar) directly onto the
glass ceramic.
The heating and heat-through times for the cookware base, as
well as the cooking results, are significantly influenced by the
structure and material of the cookware.
3.3.5
How the gas glass ceramic
cooktop works
If a cooking zone is switched on, the flame generates heat, which
directly heats the base of the cookware. The gas flame is controlled
by a highly accurate electronic gas control system (e-gas system).
Among other things, servomotors are used to accurately control each
gas burner. These servomotors calibrate themselves from time to
time and typical humming noises can be heard that are totally normal
and do not constitute a malfunction. The advantage of this electronic
gas control system is the optimum, repeatable heat regulation, which
means that the selected power levels are identical in every cooking
session. In addition, a clean, constantly increasing flame is formed at
every power level. Furthermore, if necessary, it can be automatically
reignited.
The cooktop has automatic ignition.
Power levels
The power is adjusted using power levels 1 – 9 and P. The output of
gas cooktops means that food is heated quickly. In order to avoid
burning food, slight adjustment is needed in comparison to
conventional cooking systems when selecting the power level.
Activity Power level
Keeping cooked meals warm
-
Browning chopped vegetables, fried eggs, veal,
poultry
-
Grilling prawns, corn on the cob, schnitzel, beef,
fish or burgers
-
Bringing large amounts of liquid to the boil,
searing steaks
-
Heating up water
Tab.3.13
Recommendations for power levels
The specifications provided in the table are standard values.
Each gas cooking zone is equipped with a safety
thermocouple. This element detects if the flame has gone out
(e.g. if a pan has boiled over or there is a strong draught). The
gas supply is then turned off and the burner is automatically
reignited. If reignition is not possible, the gas supply is
stopped. A gas leak is therefore prevented.
Suitable cookware
Cookware with this symbol is suitable for gas cooktops.
Suitable cookware is made of:
Bekijk gratis de handleiding van Bora Classic 2.0 CKG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bora |
| Model | Classic 2.0 CKG |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 7782 MB |
