Handleiding
Je bekijkt pagina 43 van 56
Cleaning and maintenance
EN
bora.com 43
u
Spread the cleaning agent using kitchen roll or a clean cloth.
u
Wipe the cooktop clean with a damp cloth.
u
Dry the cooktop with a clean cloth.
If the cooktop is hot:
u
Remove stubborn residues of plastic, aluminium foil, sugar or
sweet dishes from the hot cooking zone immediately using a glass
ceramic scraper to prevent burning.
Heavy soiling
u
Remove heavy soiling and marks (limescale marks, mother-of-
pearl-like shiny marks) using cleaning products while the cooktop
is still warm.
u
Wipe off any food that boils over with a damp cloth.
u
Remove any remaining dirt with the glass ceramic scraper.
u
Always remove any seeds, crumbs or similar that fall onto the
cooktop during cooking immediately to prevent the surface getting
scratched.
Any changes in colour or glossy spots do not mean that the cooktop
is damaged. They do not affect the functionality of the cooktop or the
stability of the glass ceramic panel.
Changes in the colour of the cooktop are the result of residues which
have not been removed and have burnt on.
Glossy spots are the result of wear by the pan base, especially if
aluminium-based cookware or unsuitable cleaning agents are used.
These are difficult to remove.
In the case of the gas cooktop, due to the use of enamelled
cast iron parts, slight colour variations and irregularities are
common. Furthermore, flash rust may appear at the support
points, which can be easily removed with a damp cloth. These
spots are normal and are not considered an impairment.
7.4.2
Cleaning the surface of the Tepan
stainless steel grill
Any changes in colour or small scratches do not mean that the
cooktop is damaged. They do not affect the functionality of the
cooktop or the stability of the stainless steel grill surface. Changes in
the colour of the cooktop are the result of residues which have not
been removed and have burnt on.
Use the scraper only on the grill surface as otherwise other
surfaces may be damaged.
Changes may occur in the surface of the grill after using the
spatula or a sponge scourer.
Do not apply cleaning products to the adjoining areas
between the cooktop and worktop.
Use the cleaning function to clean the Tepan stainless steel
grill.
Clean stainless steel surfaces in the polishing direction only.
Light soiling
u
Make sure that the cooktop is switched off.
u
Wait until the stainless steel grill surface has cooled.
u
Remove light soiling with a damp cloth and detergent.
u
To prevent water or limescale stains (yellowish colouring), use a
soft cloth to dry off the surfaces that have been cleaned with
water.
Normal soiling
u
Ensure that the cleaning function is activated for both grilling
zones.
u
Wait until the grilling zone indicators are no longer flashing (=
optimum cleaning temperature of 70°C).
u
Use only clean, cold water on the grill surface.
u
Leave the water to work for 15 minutes.
u
Then remove all coarse dirt and food residues using a Tepan
spatula.
u
Remove the remaining dirt and water with a clean cloth.
u
Dry the cooktop with a clean cloth.
Heavy soiling
u
Ensure that the cleaning function is activated for both grilling
zones.
u
Wait until the grilling zone indicators are no longer flashing (=
optimum cleaning temperature of 70°C).
u
Dilute a drop of washing-up liquid in a bowl of warm water
(approx.200ml).
u
Pour the liquid on the grill surface.
u
Leave the solution to work for approx. 5–8 minutes.
u
Loosen burned-on food from the grill surface with a plastic brush.
u
Remove all dirt and water with a cloth.
u
Pour 50 ml of water and a drop of washing-up liquid onto the grill
surface.
u
Clean the entire grill surface using the rough side of a sponge
scourer, only in the direction of the grain. Also use the Tepan
spatula to help.
u
Remove all of the remaining dirt and water with a clean cloth.
u
Use clean, cold water on the grill surface.
u
Remove the remaining dirt and water with a clean cloth.
u
Dry the cooktop with a clean cloth.
7.4.3
Cleaning the components on the
gas cooktop
The surface of the cast iron parts will become duller with the
passing of time. This is quite normal and does not mean that
the material is damaged.
Cleaning the pan supports
u
Remove the pan support.
T
Pan supports can only be cleaned by hand.
Bekijk gratis de handleiding van Bora Classic 2.0 CKCB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bora |
| Model | Classic 2.0 CKCB |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 7782 MB |
