Bolin Technology R9-230NX handleiding

Bewakingscamera

Bolin Technology

49 pagina's

PDF beschikbaar

Handleiding

Pattern:Static and DHCP

DHCP - The IP Address of the device will be determined and dynamically assigned from the network gateway (router). This is recommended when the device

is being installed on a network where the available IPs are unknown and a quick setup is required.

Static IP- The user will dene and enter the IP address of the device. It is recommended to put the device on a known, constant IP address and guarantee the

device will retain its IP address after a reboot or power failure. If not sure what IP addresses are available on a network, a user can set the camera to DHCP

and use the assigned address as a static IP.

NOTE:

Static IP is recommended.



IP Protocol Version:This shows the version of the Internet Protocol (IP).

IP Address:This shows the camera’s IP address, which can also be modied in this location.

NOTE:

By default, the camera is set to a Static IP Address of 192.168.0.13.

Subnet Mask:A subnet mask is a lter for IP addresses, helping to organize and divide a large network into smaller groups, so devices within each group can

communicate more eciently.

NOTE:

By default, the camera is set to a subnet mask of 255.255.255.0.

Default Gateway:When conguring the device, the default gateway IP address should be set to the IP address of the router that serves as the gateway for the

local network. This address allows the device to communicate with destinations outside its immediate network.

NOTE:

By default, the gateway is set to 192.168.0.1.

Preferred DNS Server:DNS (Domain Name System) servers are the addresses specied on a device for translating domain names into IP addresses. The

preferred DNS server is the primary server used for this translation, and the alternate DNS server serves as a backup in case the preferred server is unavailable or

experiences issues, ensuringaccess to the internet and other network resources.

On a network that is not connected to the Internet, this can be left blank.

Alternate DNS Server:allows the user to specify a secondary DNS (Domain Name System) server. This server is used for resolving domain names to IP

addresses in case the primary DNS server is unavailable or cannot be reached.

MAC Address:This is a xed address, used as a unique identier of the device on a network. This cannot be changed.



Port

Bekijk gratis de handleiding van Bolin Technology R9-230NX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.