Bolin Technology R9-230NX handleiding
Handleiding
Je bekijkt pagina 31 van 49
H Phase ne:is used for nely adjusting the horizontal phase during Genlock.
CAUTION:
CAUTION:
A sync generator must be connected before the use of Genlock.
A sync generator must be connected before the use of Genlock.
System
The Systempage is to congure the various communications parameters of the camera.
Pelco ID:When utilizing RS485 (PELCO P/D) control, assign the Camera ID to the specic address you wish to control. The value for this setting can range from 1
to 255.
VISCA ID:When utilizing RS422 (VISCA) control, assign the Camera ID to the specic address you wish to control. The value for the setting can range from 1 to 7.
IR ID:Set the IR ID between 1 and 3, which corresponds to the camera ID number you wish to control via the remote controller.
Bekijk gratis de handleiding van Bolin Technology R9-230NX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bolin Technology |
| Model | R9-230NX |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 10466 MB |
