Bolin Technology FEX22B4K-RNP2 handleiding

Bewakingscamera

Bolin Technology

49 pagina's

PDF beschikbaar

Handleiding

FTP

After the configuration of FTP, you will be able to upload snapshots from network cameras to the specified FTP server.

1. Click Setup > Network > FTP.

2. Configure the IP address, port number of the FTP server, the username

and password of the upload account, enable Upload Images and

Overwrite Storage, and then set the overwrite image threshold.

3. Click Save.

E-Mail

After the configuration of E-mail, when alarms are triggered, you will be able to send messages to the specified E-mail

address.

1. Click Setup > Network > E-mail.

2. Configure relevant parameters of the sender and the recipient.

The following table describes some major parameters.

A. SSL

a. When enabled, the e-mail will be sent through SSL

encryption.

B. Attach Image

a. When enabled, the e-mail will contain 3 instant snapshots as

attachment according to the Capture Interval.

3. Click Save.

Port Mapping

1. Click Setup > Network > Port Mapping.

2. Enable Port Mapping and select mapping type. If Manual is

selected, then external ports must be configured (external IP is

obtained automatically by the camera). If the configured port is

occupied, then the Status will show Inactive.

3. Click Save.

Bekijk gratis de handleiding van Bolin Technology FEX22B4K-RNP2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.