Bolin Technology EXU230H handleiding
Handleiding
Je bekijkt pagina 31 van 47
H Phase ne:is used for nely adjusting the horizontal phase during Genlock.
CAUTION:
CAUTION:
A sync generator must be connected before the use of Genlock.
A sync generator must be connected before the use of Genlock.
System
The Systempage is to congure the various communications parameters of the camera.
Pelco ID:When utilizing RS485 (PELCO P/D) control, assign the Camera ID to the specic address you wish to control. The value for this setting can range from 1
to 255.
VISCA ID:When utilizing RS422 (VISCA) control, assign the Camera ID to the specic address you wish to control. The value for the setting can range from 1 to 7.
IR ID: Set the IR ID between 1 and 3, which corresponds to the camera ID number you wish to control via the remote controller.
Bekijk gratis de handleiding van Bolin Technology EXU230H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bolin Technology |
| Model | EXU230H |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 12525 MB |
