Bolin Technology D2-220H handleiding
Handleiding
Je bekijkt pagina 28 van 53
28
D
Flo
WB MODE: SVL (Sodium Vapor Lamp): This is a fixed white balance mode specifically for sodium vapor
lamps illumination.
WB MODE - USER: R GAIN and B GAIN: This mode allows you to manually set the red and blue gain from 0 to up
100 steps.
PICTURE 1
SHARPNESS: Adjust the clarity of the image from 0 to 100
EFFECT: Switch between OFF and Black and White (B&W)
2D NR: A method of reducing the noise of an image by comparing frame-to-frame
and removing the variations that do not appear in each frame.
3D NR: A method of reducing image noise by comparing variances within the same
frame, as well as frame-to-frame. This process will reduce noise without leaving
trails behind a moving object.
FLIP: Image E-Flipper: Used with ceiling mount or upright mount. Set to OFF with
an upright mount, and ON with a ceiling mount.
MIRROR: See the image as seen in a mirror, with the right side shown as the left side..
BLC: Black Light Compensation On/Off.
DE-FLICKER: OFF, 50Hz and 60Hz settings
PICTURE 2
GAMMA: Can be set to Default, 0.63,0.55,0.50 and 0.45.
WDR (Wide Dynamic Range): ON /OFF.
The camera detects light and dark sections within the same scene, and automatically
adjust the brightness for dark areas, and controls the blown-out highlights.
SATURATION: Adjust the saturation level from 0 to 100.
CONTRAST: Adjust the contrast level from 0 to 100
HUE: Adjust the color phase from 0 to 100
BRIGHT: Adjust the brightness level from 0 to 100
IMG STYLE: Based on the selected image style, automatically adjust all parameters above (Picture 2) to
match the selected style. Available style options: DEFUAULT, SOFT, CLEAR and BRIGHT.
PAN TILT ZOOM
DIGITAL ZOOM: Turn the digital zoom of the camera ON/OFF.
ZOOM RATIO OSD: Turn the zoom ratio OSD On/Off on the display monitor.
VIDEO PARAMETERS: On/Off on-screen-display of the parameter value when
using the “+” or “-” functions of the IR remote control (see IR remote control section
11 and 12).
ADAPTIVE PT: ON/OFF. On, Pan Tilt speed is adaptive to the zoom range.
P/T SPEED: Set the Pan/Tilt Speed value from 0 to 5.
PRESET SPEED: Set the preset speed value from 0 to 5.
PAN DIR: NORMAL: IR remote left and right arrows pan right and left.
INVERT: Left and right arrows pan left and right.
TILT DIR: NORMAL: IR remote control up and down arrows tilt up and down.
INVERT: Up and down arrows tilt down and up.
Note: The IR remote control and controller joystick cannot be used simultaneously.
Bekijk gratis de handleiding van Bolin Technology D2-220H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bolin Technology |
| Model | D2-220H |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 12576 MB |
