Bogen PCM2000 handleiding
Handleiding
Je bekijkt pagina 29 van 40
29
CONFIGURATION 13:
EMERGENCY ALERT TONES
Emergency Alert Tones is a non-programmable feature that lets the caller take priority over all paging functions and send an emergency
alert tone to all speakers. In addition to the PCM2000 modules, this option requires a Bogen VMIX (8-channel mixer/pre-amplifier),
an input/output module RIO1S, and a Tone Generator module TNG1S.
INSTALLATION:
STEP 1: Assemble Modules PCMTIM to PCMCPU and to PCMZPM (see Illustration/Instructions on Appendix page 37,
then return to this page and complete the following Steps).
Note: DO NOT
connect the PCMPS2 (power supply) at this point.
STEP 2: Connecting the Paging Amplifier
• Locate the terminals on the PCMCPU module labeled PA IN/RT and wire to the TIP and Ring (T & R) input on the Bogen
paging amplifier (either TPU-Series, GS-Series, or Classic Series amplifiers).
• Locate the terminals on the PCMCPU module labeled PA OUT/RT and wire to COMMON and either the 25 or 70V output
on the paging amplifier.
STEP 3: Connecting Optional Equipment
• Insert a RIO1S module into Slot 7 or 8 of the VMIX, and insert the TNG1S into one of the other slots (1 thru 6).
• Connect a 6-conductor cable between RJ11 modular jack on the RIO1S and the OVER RIDE input on the PCMTIM.
• Any selected tone on the tone generator module TNG1S can be activated using a dry contact closure (relay, switch, etc.).
STEP 4: Switch and Control Settings
• Refer to paging access modules described previously. See instructions described in the first bullet within STEP 3 on page 5 if using
Page Port Contact Closure; page 7 for Page Port VOX; page 9 for Loop Start Trunk; page 11 for Ground Start Trunk; or page 13 for
Station Level/Centrex. Then return to this page to complete the following Step.
STEP 5: Testing Your System
• Connect the power supply PCMPS2 to the PCMCPU module to either the power jack 12V DC input or wire it to the 12V DC screw
terminals, observing polarity.
• Connect the Bogen amplifier to the AC power outlet (120V AC 60Hz).
• Set the volume on your Bogen amplifier to a half turn.
• Press the normally open customer supplied switch once and listen for the emergency tones.
Bekijk gratis de handleiding van Bogen PCM2000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bogen |
| Model | PCM2000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3772 MB |
