Bogen Nyquist NQ-GA20P2 handleiding
Handleiding
Je bekijkt pagina 21 van 45

17
Note: A maximum of 24 multicast entries is supported.
Accessing Log Files
A log file records events and messages that occur when software runs, to be used when
troubleshooting the appliance. From the appliance’s web-based UI, log files can be
viewed directly or exported via download to your PC, Mac, or Android device, where they
can be copied to removable media or attached to an email for technical support.
To view a log file:
1 On the appliance Web UI’s main page, select Logs.
2 From the drop-down menu, select the log that you want to view.
Multiple versions of the same log, and zipped copies of the log, may be available.
3 To export the file, select Export.
A link to a .txt file appears in the browser’s lower left corner.
Cut Level (dB) Specifies the cut level for the audio stream.
This can be a value from
−70 to 0 dB.
The default value is
−20 dB.
Note: To modify, click on the value, adjust the slider on the popup
using the cursor keys or mouse, and click the check box button.
Tip: To fine tune the cut level per channel, adjust the gain
settings on the DSP Router.
Description User-specified description of this multicast address.
This setting can contain a maximum of 30 characters and
should not contain any of the following:
[]{}<>,|:
Multicast Addresses should be ordered by priority, highest priority first. If multiple
streams are active on the same channel simultaneously, the one with the highest prior-
ity will be played. Set the Sorting switch to Enabled and drag entries using the 4-way
arrow symbols to drag entries up and down to rearrange the priorities.
Bekijk gratis de handleiding van Bogen Nyquist NQ-GA20P2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Bogen |
Model | Nyquist NQ-GA20P2 |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 5186 MB |