Bogen Nyquist NQ-GA20P2 handleiding
Handleiding
Je bekijkt pagina 14 van 45
10
Configuration Settings Tab Parameters
The easiest way to configure Nyquist appliances is to obtain configuration settings from
the Nyquist server by selecting Get Configuration From Server. However, you can man-
ually configure an appliance through the appliance’s Web UI when Standalone Operation
is enabled (see "Standalone Operation Configuration Settings” on page 13).
To view the Nyquist appliance configuration:
1 On the appliance Web UI’s main page, select Configuration Settings.
2 View the settings as described in Table 5 on page 12 for normal configuration, or
modify the settings as described in "Standalone Operation Configuration Settings” on
page 13 for Standalone Operation configuration.
3 If changes were made (Standalone Operation only), click the Save Configuration
Settings and/or Save Multicast Addresses buttons to save your changes.
TFTP Server from DHCP “Yes” means the device will use the DHCP option 66
value to retrieve an address for the TFTP Server from
DHCP.
“No” means the device will ignore the DHCP option
66 value and use the manually configured value of
the TFTP Server (see above).
Note: This setting is not available when Standalone Operation is
enabled.
DHCP Enabled Indicates if the device is enabled to use DHCP to
retrieve its IP configuration.
Reboot Appliance Indicates that this appliance should reboot when the
Save button is clicked.
Table 4. Network Settings (Continued)
Bekijk gratis de handleiding van Bogen Nyquist NQ-GA20P2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Bogen |
| Model | Nyquist NQ-GA20P2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5186 MB |
