BodyCraft GT/X Functional Cable Arm Handleiding (72 Pagina's)

Handleiding

Product Assembly, GT, DECISION POINT on STEP 3c

24

NEED with color

If you are NOT installing the F735

Olympic Plate Rack Option, go

directly to

STEP 5a

NOTE: If you are installing the F735 Olympic

Plate Rack Option, change the following

hardware:

Upper Hardware:

● DO NOT use both the shorter #254

bolts in STEP 6a

Lower Hardware:

● Take out & DO NOT use both the

shorter #22 bolts & #27 washers

Part # Assembly Parts List QTY

GT-X-050

Support Tube for 051 Rollers, Stainless Steel, 5/16" nuts inserted &

welded on both ends 2

GT-X-051 Roller, Upholstered Foam 6

GT-X-066 End Cap for Upholstered Roller, Large Hole, Plastic - BLK 6

GT-X-067 End Cap for Upholstered Roller, Small Hole, Plastic - BLK 6

DECISION POINT

At the Leg Extension / Curl Station, the bottom set of Rollers (51)

can be installed at either hole on the Leg Extension Arm (13-ASM).

The Support Tube (50) can be installed in:

- The top hole, which will accommodate shorter legs.

or

- The bottom hole, which will accommodate longer legs.

It comes down to personal comfort while doing variety of leg

exercises.

DECISION POINT

GT - STEP 3c

Please go directly to the

GT Functional Cable Arms

- Owner’s Manual to

continue the base unit

assembly GT,STEP 1a -

1d

Easier to not forget any parts & shorten the

assembly time, when laying out the next STEP

parts in order to install.

When assembled and tightened correctly, the

roller pads should look like the image above.

Preparing for STEP 3d: Roller Pads Installation

Bekijk gratis de handleiding van BodyCraft GT/X Functional Cable Arm, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.