Blustream SM11EARC-8K handleiding

12 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 3 van 12
SM11EARC-8K USER MANUAL
03Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk
Our SM11EARC-8K HDMI signal manager has been designed to help solve HDMI
compatibility, HDCP2.3, clock stretching, EDID and handshaking issues that are
common problems when distributing HDMI signals, especially 4K and higher.
The SM11EARC-8K features an independent audio only HDMI output for ARC/eARC
audio breakout, and audio de-embedding or embedding within the HDMI signal
path, allowing breakout of up to 7.1ch audio signals. The SM11EARC-8K supports
all HDMI2.1 video resolutions to 40Gbps, and is HDCP2.3 compliant.
Introduction
Can help to solve most HDMI EDID, HDCP, compatibility, and handshaking issues
Supports HDMI2.1 40Gbps specification, including HDR
Supports up to 8K 60Hz YCbCr 4:2:0 10bit, 8K 30Hz RGB/YCbCr 4:4:4 10bit, or 4K 120Hz RGB/YCbCr 4:4:4 10bit
Supports ALLM (Auto Low Latency Mode) & VRR (Variable Refresh Rate)
Supports pass-through of all known HDMI audio formats including Dolby Atmos, Dolby TrueHD, Dolby Atmos, Dolby
Digital Plus and DTS-HD Master
Can be configured to work as either a HDMI audio de-embedder, or audio embedder
Independent audio only HDMI output for ARC/eARC audio breakout
HDMI audio de-embedded to both analogue L/R audio and optical digital outputs concurrently (analogue audio
supports 2ch PCM only)
Embed analogue L/R 2ch audio input onto HDMI output
Extract audio with or without an actual display connected (SM11EARC-8K acts as HDMI end-point)
HDCP2.3 compliant, with advanced EDID management
FEATURES:

Bekijk gratis de handleiding van Blustream SM11EARC-8K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkBlustream
ModelSM11EARC-8K
CategorieNiet gecategoriseerd
TaalNederlands
Grootte1003 MB