Blustream PWR4IEC handleiding
Handleiding
Je bekijkt pagina 43 van 49
PWR4IEC USER MANUAL
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk
43
RS-232 Configuration and Telnet Commands
COMMAND ACTION
? / HELP Print help information
STATUS Print system status and port status
ELESTA Print All Outputs Electricity Level Information
FWVERSION Print FW Version And GUI Version
DEVICENAME:xx Set Device Name To xx
PON Set System Power to ON
POFF Set System Power to OFF
RELAY ON/OFF Set System RELAY Control ON Or OFF
KEY ON/OFF Set System Key Control ON Or OFF
RESET
Reset System To Default Setting(Type “Yes” To Con-
firm, “No” To Discard)
REBOOT Set System Reboot And Apply New Config!!!
RESTA Set System Restart
SETCURRENTHRESH-
OLD xx
Set System Current Threshold To xx (xx to one
decimal place at most)
xx = 0.0 : 10.9
SAFEMODE xx
Set The System Safe Mode To xx When Overloaded
xx = 0 Outlet_Shutdown
1 System_Shutdown
2 Auto_Retry
OVERLOADRETRYCNT
xx
Set The System Retry Number To xx When
Overloaded(Default: 1) xx = 1 : 3
OVERLOADRETRY-
TIME xx
Reset System To Default Setting
STANDBYMODE xx
Set The System Standby Mode To xx
xx = 0 All_Standby_Mode
1 Sleep_Mode
RELAYMODE xx
Set The System Relay Mode To xx
xx = 0 Dry_Contact
1 Push_Button
RELAYVOLTAGE xx
Set The System Relay Toggle Voltage To xx
xx = 0 Low_Voltage
1 High_Voltage
BEEPERTIME xx
Set The Buzzer Sound Time To xx Seconds When
Alarming (Default: 10 Seconds)
xx = 0 : 9999
OUTLETTIMEON xx:yy
Set Outlet xx Power_ON Delay To yy Seconds
xx = 1 Outlet 1
2 Outlet 2
3 Outlet 3
4 Outlet 4
yy = 0 : 9999
OUTLETTIMEOFF xx:yy
Set Outlet xx Power_OFF Delay To yy Seconds
xx = 1 Outlet 1
2 Outlet 2
3 Outlet 3
4 Outlet 4
yy = 0 : 9999
OUTLETELERESET
xx:yy
Set Outlet xx Electrical Work Reset Duration To yy
Seconds (Default: 10 Seconds)
xx = 1 Outlet 1
2 Outlet 2
3 Outlet 3
4 Outlet 4
yy = 0 : 9999
ALLOUT ON/OFF Set All Outlets ON/OFF
COMMAND ACTION
OUTLET xx ON/OFF
Set Outlet xx ON/OFF
xx = 1 Outlet 1
2 Outlet 2
3 Outlet 3
4 Outlet 4
RSALLOUTELE Clean Up All Outlets Electrical Work
RSOUTELE xx
Clean Up The Outlet xx Electrical Work
xx = 1 Outlet 1
2 Outlet 2
3 Outlet 3
4 Outlet 4
SYSTIME Get The Time For The System
RESYSTIME yyyy-mm-
dd;hh:mm:ss
Set The Time For The System
yyyy = Year
mm = Month
dd = Day
hh = Hour
mm = Minute
ss = Second
RS232OUT y:z:c:a
Send y Type Of Command a With Baud Rate z, Parity
c To Output
y=a: ASCII
y=h: HEX
z=1: 2400
z=2: 4800
z=3: 9600
z=4: 19200
z=5: 38400
z=6: 57600(Default)
z=7: 115200
c=1: None
c=2: Even
c=3: Odd
a=RS232 Command
RS232BAUD z
Set RS232 Baud Rate To xx
z = 1 - 2400
2 - 4800
3 - 9600
4 - 19200
5 - 38400
6 - 57600(Default)
7 - 115200
NET TCP/IP ENABLE xx
Set TCP/IP xx Enable(Only One Can Be Enabled)
xx = 1 TCP/IP1
2 TCP/IP2
NET TCP/IP1 DHCP
ON/OFF
Set TCP/IP1 Auto IP (DHCP) ON or OFF
NET TCP/IP1 IP xxx.
xxx.xxx.xxx
Set TCP/IP1 IP Address
NET TCP/IP1 GW xxx.
xxx.xxx.xxx
Set TCP/IP1 Gateway Address
NET TCP/IP1 SM xxx.
xxx.xxx.xxx
Set TCP/IP1 Subnet Mask Address
NET TCP/IP2 DHCP
ON/OFF
Set TCP/IP2 Auto IP (DHCP) ON or OFF
NET TCP/IP2 IP xxx.
xxx.xxx.xxx
Set TCP/IP2 IP Address
NET TCP/IP2 GW xxx.
xxx.xxx.xxx
Set TCP/IP2 Gateway Address
Bekijk gratis de handleiding van Blustream PWR4IEC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Blustream |
| Model | PWR4IEC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8395 MB |
